Abstract:The goal of the protocol described in this article is to prepare aluminothermic compositions (nanothermites) in the form of porous, monolithic objects. Nanothermites are combustible materials made up of inorganic fuel and an oxidizer. In nanothermite foams, aluminum is the fuel and aluminum phosphate and tungsten trioxide are the oxidizing moieties. The highest flame propagation velocities (FPVs) in nanothermites are observed in loose powders and FPVs are strongly decreased by pelletizing nanothermite powders. From a physical standpoint, nanothermite loose powders are metastable systems. Their properties can be altered by unintentional compaction induced by shocks or vibrations or by the segregation of particles over time by settling phenomena, which originates from the density differences of their components. Moving from a powder to an object is the challenge that must be overcome to integrate nanothermites in pyrotechnic systems. Nanothermite objects must have both a high open porosity and good mechanical strength. Nanothermite foams meet both of these criteria, and they are prepared by dispersing a nano-sized aluminothermic mixture (Al/WO3) in orthophosphoric acid. The reaction of aluminum with the acid solution gives the AlPO4 "cement" in which Al and WO3 nanoparticles are embedded. In nanothermite foams, aluminum phosphate plays the dual role of binder and oxidizer. This method can be used with tungsten trioxide, which is not altered by the preparation process. It could probably be extended to some oxides, which are commonly used for the preparation of high performance nanothermites. The WO3-based nanothermite foams described in this article are particularly insensitive to impact and friction, which makes them far safer to handle than loose Al/WO3 powder. The fast combustion of these materials has interesting applications in pyrotechnic igniters. Their use in detonators as primers would require the incorporation of a secondary explosive in their composition.

Bio-inspired metastable intermolecular nanothermite composite based on Manganese dioxide/Polydopamine/Aluminium

Self-assembly preparation of advanced metastable MCo2O4/GO/Al (M=Cu, Mg, Zn, Ni) nanothermites to realize large heat release, stable combustion and high safety

Nanothermite with Meringue-like Morphology: From Loose Powder to Ultra-porous Objects

High dispersity and ultralight PVP-mediated Al/MFe2O4/g-C3N4 (M = Cu, Mg, Ni) nanothermites synthesized by a novel sol-freeze-drying technology

Enhanced energy performance from core–shell structured Al@Fe2O3 nanothermite fabricated by atomic layer deposition

Enhancing the energy release performance of nanothermites through metal oxides free oxygen and pores

Biofunctionalization of HMX with Peptides via Polydopamine Crosslinking for Assembling an HMX@Al@CuO Nanoenergetic Composite

Thermal and combustion behavior of Al-MnO2 nanothermite with poly(vinylidene fluoride -co- hexafluoropropylene) energetic binder

Mussel-inspired Polydopamine-Directed Crystal Growth of Core-Shell N-Al@pda@cuo Metastable Intermixed Composites

Improved ignition and combustion performances of aluminum nanoparticles by in-situ partial conversion of native alumina to surface Al-MOF shell

Iron Oxide/Aluminum/Graphene Energetic Nanocomposites Synthesized by Atomic Layer Deposition: Enhanced Energy Release and Reduced Electrostatic Ignition Hazard

Synergistic Catalytic Effect of Thermite Nanoparticles on HMX Thermal Decomposition

Unraveling the Effect of MgAl/CuO Nanothermite on the Characteristics and Thermo-Catalytic Decomposition of Nanoenergetic Formulation Based on Nanostructured Nitrocellulose and Hydrazinium Nitro-Triazolone

3D ordered macroporous NiO/Al nanothermite film with significantly improved higher heat output, lower ignition temperature and less gas production

Enhancing the Energy Release Performance of Al/CuO Nanothermites through Hierarchical Structure

Core–shell-structured Nanothermites Synthesized by Atomic Layer Deposition

Synthesis Of Nano-Nickel-Coated Micro-Aluminum And Thermal Reactivity Of Aluminum/Nickel-Stannic-Oxide Thermite

Facile Formation of Nitrocellulose-Coated Al/Bi2O3 Nanothermites with Excellent Energy Output and Improved Electrostatic Discharge Safety

Effect of Poly(Vinylidene Difluoride) Content on Thermal Reaction and Combustion Performance of MnO2-Al Nanothermite

Energetic properties of new nanothermites based on in situ MgWO4-rGO, CoWO4-rGO and Bi2WO6-rGO

A Smart Thermite with Tunable Properties – Doping of Al/Cuo with Microwave Absorbing Ti3c2 Mxene for Improved Ignition and Combustion Performance