Abstract:A series of tungsten-gradually doped diamond-like carbon (DLC) films with functionally graded interlayer were prepared using a hybrid technique of vacuum cathodic arc/magnetron sputtering/ion beam deposition. With ‘compositionally graded coating’ concept, the deposition of wear-resistant carbon-based films with excellent adhesion to metallic substrate was realized. In the films, a functionally graded interlayer with layer sequence of Cr/CrN/CrNC/CrC/WC was first deposited onto the substrate, and then, a DLC layer doped with gradually decreasing content of W was coated on. The W concentration gradient along depth of the film was tailored by adjusting the W target current and deposition time. The characterized results indicate that the microstructural, mechanical and tribological properties of these films show a significant dependence on the W concentration gradient. A high fraction of W atom in carbon matrix can promote the formation of sp2 sites and WC1−x nanoparticles. Applying this coating concept, strongly adherent carbon films with critical load exceeding 100N in scratch test were obtained, and no fractures or delaminations were observed at the end of the scratched trace. The hardness was found to vary from 13.28 to 32.13GPa with increasing W concentration. These films also presented excellent tribological properties, especially significantly low wear rate under dry sliding condition against Si3N4 ball. The optimum wear performance with friction coefficient of 0.19 and wear rate of 8.36×10−7 mm3/Nm was achieved for the tungsten-gradually doped DLC film with a graded W concentration ranging from 52.5% to 17.8%. This compositionally graded coating system might be a potentially promising candidate for wear-resistant carbon-based films in the demanding tribological applications.

Structural, mechanical, and tribological properties of GLC film on a nitrided layer prepared in a glow-discharge plasma nitriding system

Characterization of microstructure and surface properties of GLC film deposited in plasma nitriding system

Construction of a dense structure for GLC coatings by tailoring the nitrogen content to improve the aqueous-adaptability

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Structure and Characterization of TiC/GLC Multilayered Films with Various Bilayers Periods

Structural and environmental dependence of superlubricious properties in hydrogenated Graphite-Like carbon Films: Implications in solid state lubrication

Enhancement of the properties of pulsed laser-deposited carbon nitride by the synchronisation of laser and N2 gas jet pulses

Catalytic Growth of High-Performance Graphite-like Carbon Films on a Nitrided Substrate: Experimental Study and First-Principles Calculations

Structure and tribological properties of carbon nitride films obtained by the reactive ionized cluster beam method

Structural And Tribological Characteristics Of Carbon Nitride Films Deposited By The Reactive Ionized-Cluster Beam Technique

Bonding Structure and Tribological Properties of Dlc Films Synthesized by Dual-Ion Beam Sputtering

Tribological performance of GLC, WC/GLC and TiN films on the carburized M50NiL steel

Nitrogen diffusion mechanism, microstructure and mechanical properties of thick Cr/CrN multilayer prepared by arc deposition system

Enhancing tribological performance of graphene sheet-embedded carbon films on steel substrates via texture engineering and chromium doping

Different Tribological Behaviors in Multilayer 2D Graphene and 3D Graphene Foam Modified DLC/H-DLC Film in Moist Air

Multilayer structure design for preparing ultralow wear amorphous carbon films

Microstructure and properties of the AlCrMoZrTi/(AlCrMoZrTi)N multilayer high-entropy nitride ceramics films deposited by reactive RF sputtering

Microstructural, Mechanical and Tribological Properties of Tungsten-Gradually Doped Diamond-Like Carbon Films with Functionally Graded Interlayers

Improving mechanical properties of a-CNx films by Ti-TiN/CN x gradient multilayer

Microstructure and Mechanical Properties of a CrCN/Cr Multilayer Film