Abstract:BiFeO 3 (BFO) has received considerable attention as a lead-free ferroelectric film due to its large theoretical remnant polarization. However, BFO suffers from a large leakage current, resulting in poor ferroelectric properties. Herein, the sol–gel method was used to deposit a series of BFO-based thin films on fluorine-doped tin oxide substrates, and the effects of the substitution of the elements Co, Cu, Mn ( B -site) and Sm, Eu, La ( A -site) on the crystal structure, ferroelectricity, and leakage current of the BFO-based thin films were investigated. Results confirmed that lattice distortion by X-ray diffraction can be attributed to the substitution of individual elements in the BFO-based films. Sm and Eu substitutions contribute to the lattice distortion in a pseudo-cubic structure, while La is biased toward pseudo-tetragonal. Piezoelectric force microscopy confirmed that reversible switching of ferroelectric domains by nearly 180° can be realized through the prepared films. The ferroelectric hysteresis loops showed that the order for the polarization contribution is as follows: Cu > Co > Mn ( B -site), Sm > La > Eu ( A -site). The current density voltage curves indicated that the order for leakage contribution is as follows: Mn < Cu < Co ( B -site), La < Eu < Sm ( A -site). Scanning electron microscopy showed that the introduction of Cu elements facilitates the formation of dense grains, and the grain size distribution statistics proved that La element promotes the reduction of grain size, leading to the increase of grain boundaries and the reduction of leakage. Finally, a Bi 0.985 Sm 0.045 La 0.03 Fe 0.96 Co 0.02 Cu 0.02 O 3 (SmLa-CoCu) thin film with a qualitative leap in the remnant polarization from 25.5 (Bi 0.985 Sm 0.075 FeO 3 ) to 98.8 μC/cm 2 (SmLa-CoCu) was prepared through the synergistic action of Sm, La, Co, and Cu elements. The leakage current is also drastically reduced from 160 to 8.4 mA/cm 2 at a field strength of 150 kV/cm. Thus, based on the increasing entropy strategy of chemical engineering, this study focuses on enhancing ferroelectricity and decreasing leakage current, providing a promising path for the advancement of ferroelectric devices.

Interface-layer-assisted reliable ferroelectricity in BiFeO 3 thin films by chemical solution deposition

Outstanding Ferroelectricity in Sol–Gel-Derived Polycrystalline BiFeO 3 Films within a Wide Thickness Range

Outstanding Ferroelectricity in Sol-Gel-Derived Polycrystalline BiFeO3 Films within a Wide Thickness Range

Great enhancement of ferroelectric properties of Al2O3-modified BiFeO3 thin films obtained by sol-gel method

Direct observation of room-temperature out-of-plane ferroelectricity and tunneling electroresistance at the two-dimensional limit

Enhanced ferroelectric and improved leakage of BFO-based thin films through increasing entropy strategy

Structural, dielectric and ferroelectric properties of BiFeO3–BiInO3 solid solution thin films obtained by sol-gel method

Interface engineering of ferroelectricity in thin films of thiophosphate A B P 2 X 6 ( A = Cu , Ag ; B = In , Bi , Cr , V ; X = S , Se )

Interface engineering of ferroelectricity in thin films of thiophosphate ABP 2 X 6 (A = Cu, Ag; B = In, Bi, Cr, V; and X = S, Se)

Growth and Physical Properties of BiFeO3 Thin Films Directly on Si Substrate

Effective strategy for optimizing the leakage current and ferroelectric polarization characteristics of BiFeO3_PVDF-TrFE nanocomposite films

Chemical and interfacial design in the visible-light-absorbing ferroelectric thin films

Ferroelectricity of the BiFeO3 prepared by the chemical solution deposition method

Manipulating the Ferroelectric Domain States and Structural Distortion in Epitaxial BiFeO 3 Ultrathin Films via Bi Nonstoichiometry.

Structural Changes and Ferroelectric Properties of BiFeO<sub>3</sub>-PbTiO<sub>3</sub> Thin Films Grown via a Chemical Multilayer Deposition Method

Structures and Electrical Properties of Bi5feti3o15 Thin Films

Improvement of remanent polarization of CeO 2 –HfO 2 solid solution thin films on Si substrates by chemical solution deposition

Controllable Distribution and Reversible Migration of Charges in BiFeO3-Based Films on Si Substrates.

Fabrication of electrically bistable organic semiconducting/ferroelectric blend films by temperature controlled spin coating.

Facile and Solvent-Free Fabrication of Highly Oriented Ferroelectric Copolymer Thin Films and Its Application in Ferroelectric Field Effect Transistors

Tuning Phase Fractions and Leakage Properties of Chemical Solution Deposition-Derived Mixed-Phase BiFeO 3 Thin Films