Abstract:BiFeO 3 (BFO) has received considerable attention as a lead-free ferroelectric film due to its large theoretical remnant polarization. However, BFO suffers from a large leakage current, resulting in poor ferroelectric properties. Herein, the sol–gel method was used to deposit a series of BFO-based thin films on fluorine-doped tin oxide substrates, and the effects of the substitution of the elements Co, Cu, Mn ( B -site) and Sm, Eu, La ( A -site) on the crystal structure, ferroelectricity, and leakage current of the BFO-based thin films were investigated. Results confirmed that lattice distortion by X-ray diffraction can be attributed to the substitution of individual elements in the BFO-based films. Sm and Eu substitutions contribute to the lattice distortion in a pseudo-cubic structure, while La is biased toward pseudo-tetragonal. Piezoelectric force microscopy confirmed that reversible switching of ferroelectric domains by nearly 180° can be realized through the prepared films. The ferroelectric hysteresis loops showed that the order for the polarization contribution is as follows: Cu > Co > Mn ( B -site), Sm > La > Eu ( A -site). The current density voltage curves indicated that the order for leakage contribution is as follows: Mn < Cu < Co ( B -site), La < Eu < Sm ( A -site). Scanning electron microscopy showed that the introduction of Cu elements facilitates the formation of dense grains, and the grain size distribution statistics proved that La element promotes the reduction of grain size, leading to the increase of grain boundaries and the reduction of leakage. Finally, a Bi 0.985 Sm 0.045 La 0.03 Fe 0.96 Co 0.02 Cu 0.02 O 3 (SmLa-CoCu) thin film with a qualitative leap in the remnant polarization from 25.5 (Bi 0.985 Sm 0.075 FeO 3 ) to 98.8 μC/cm 2 (SmLa-CoCu) was prepared through the synergistic action of Sm, La, Co, and Cu elements. The leakage current is also drastically reduced from 160 to 8.4 mA/cm 2 at a field strength of 150 kV/cm. Thus, based on the increasing entropy strategy of chemical engineering, this study focuses on enhancing ferroelectricity and decreasing leakage current, providing a promising path for the advancement of ferroelectric devices.

Effective strategy for optimizing the leakage current and ferroelectric polarization characteristics of BiFeO3_PVDF-TrFE nanocomposite films

Enhanced ferroelectric and improved leakage of BFO-based thin films through increasing entropy strategy

Outstanding Ferroelectricity in Sol–Gel-Derived Polycrystalline BiFeO 3 Films within a Wide Thickness Range

Great enhancement of ferroelectric properties of Al2O3-modified BiFeO3 thin films obtained by sol-gel method

Interface-layer-assisted reliable ferroelectricity in BiFeO 3 thin films by chemical solution deposition

Outstanding Ferroelectricity in Sol-Gel-Derived Polycrystalline BiFeO3 Films within a Wide Thickness Range

Current-voltage Behaviors of BiFeO3/poly(vinylidene Fluoride- Trifluoroethylene) Composite Films

Double enhanced energy storage density via polarization gradient design in ferroelectric poly(vinylidene fluoride)-based nanocomposites

Improved Breakdown Strength and Restrained Leakage Current of Sandwich Structure Ferroelectric Polymers Utilizing Ultra-Thin Al2O3 Nanosheets

Enhancement of ferroelectric performance in PVDF:Fe<sub>3</sub>O<sub>4</sub> nanocomposite based organic multiferroic tunnel junctions

Polarization-induced internal electric field to manipulate piezo-photocatalytic and ferro-photoelectrochemical performance in bismuth ferrite nanofibers

Improved ferroelectricity and magnetoelectric coupling effect of multielements co-substituted BiFeO<sub>3</sub> ceramics

Enhanced Dielectric/ferroelectric Properties of P(VDF-TrFE) Composite Films with Organic Perovskite Ferroelectrics

Influence of core–shell structured conductive fillers on the electromechanical properties of ferroelectric nanocomposites

SYSTEMATIC EXPLORATION OF THE EFFECTS OF CR-DOPING ON MICROSTRUCTURE, INSULATING, AND FERROELECTRIC PROPERTIES OF BiFeO3 THIN FILM

Tuning ferroelectric domains and polarization properties of flexible BiFeO 3 thin films by phase transition engineering

Optimization of electro-strain and ferroelectric properties of P(VDF-TrFE) films under the synergistic effect of PTO nanosheets and in-situ electrostatic field

Reducing Leakage Current and Enhancing Polarization in Multiferroic 3D Super-nanocomposites by Microstructure Engineering

Ferroelectric nanocomposite networks with high energy storage capacitance and low ferroelectric loss by designing a hierarchical interface architecture.

Improved Energy Storage Performance of P(VDF-TrFE-CFE) Multilayer Films by Utilizing Inorganic Functional Layers

Magnetic Field Effects on the Structure, Dielectric and Energy Storage Properties of High-Entropy Spinel Ferrite (La0.14Ce0.14Mn0.14Zr0.14Cu0.14Ca0.14Ni0.14)Fe2O4/PVDF Nanocomposites