Abstract:Electron beam melting (EBM) is a promising powder bed fusion additive manufacturing (AM) technology for the preparation of complex refractory components due to the significant advantages of vacuum environment and high level in energy utilization, scanning speed and temperature in the build chamber. However, the fabrication of crack-free and refined W-based alloy remains a challenge. This study aims to address this problem by introducing 0.7 wt% carbon in EBM W-3.5Nb alloy. Results revealed that the as built W-3.5Nb alloy had a typical columnar structure with obvious solidification cracks along the grain boundary. Doping 0.7 wt% carbon generated refined microstructure, which was composed of the initial dendrite of tungsten and the eutectic phase in the dendrites gap. Due to the low distribution coefficient of carbon, the nucleation at the bottom of the molten pool was caused by constitutional supercooling in the front of liquid solidification in a single molten pool, and velocity of the solidification front was reduced by carbon concentration leading increased thermal supercooling. Supercooling (thermal supercooling together with constitutional supercooling) refined the microstructure of W-3.5Nb alloy effectively. Meanwhile, due to the formation of eutectic phase with low melting point, the fluidity of liquid phase at the terminal solidification was improved and the solidification cracks along the grain boundary were reduced. The carbon addition also played a significant role in alloy strengthening. The microhardness of the alloy increased from 382 HV to 696 HV, and the compressive strength increased from 962.89 MPa to 1892.56 MPa. These findings offer a new perspective on the AM fabrication of high-quality W-based alloys.

Microstructure and mechanical properties of a newly developed WTaRe refractory alloy by selective electron beam melting

High-temperature mechanical behaviors of a WTaRe refractory alloy manufactured by selective electron beam melting

Effect of tantalum concentration on the microstructure and mechanical properties of novel W–Ta-Re alloy

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Selective electron beam melting of WMoTaNbVFeCoCrNi refractory high-entropy alloy

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Microstructure and Mechanical Properties of Novel High-Strength, Low-Activation Wx(TaVZr)100-x (x = 5, 10, 15, 20, 25) Refractory High Entropy Alloys

Design of heterogeneous structure for enhancing formation quality of laser-manufactured WTaMoNb refractory high-entropy alloy

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

Microstructure and Mechanical Properties of the Ti62Nb12Mo12Ta12W2 Refractory High Entropy Alloy Prepared through Spark Plasma Sintering

The Microstructures, Mechanical Properties, and Deformation Mechanism of B2-Hardened NbTiAlZr-Based Refractory High-Entropy Alloys

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

High Strength and Tackling Structural Relaxation by Sub-Grains Synergistic Deformation in W-Re Alloy

Excellent room-temperature tensile ductility in as-cast Ti37V15Nb22Hf23W3 refractory high entropy alloys

Microstructures and mechanical properties of novel MoTaVW refractory high-entropy alloys

Microstructures and Mechanical Properties of TixNbMoTaW Refractory High Entropy Alloys

Ti-48Al-2Cr-2Nb alloys prepared by electron beam selective melting additive manufacturing: microstructural and tensile properties

WReTaMo Refractory High‐Entropy Alloy with High Strength at 1600 °C

Refined W-3.5Nb alloy fabricated by electron beam melting via doped carbon

Microstructure and Mechanical Properties of WTaVCrTi Refractory High-Entropy Alloy by Vacuum Levitation Melting for Fusion Applications