Abstract:The WNbMoTa-based refractory high entropy alloy (RHEA) is expected to become a new generation of hightemperature materials due to its high thermal stability, which can be used in aerospace, nuclear energy and other fields. In this paper, TN10 (TN is the abbreviation of Ti and Ni elements), TN15, TN20 and TN25 nonequimolar WNbMoTa-based RHEAs were designed based on phase engineering and formed by laser powder bed fusion (LPBF) technology. The solidification thermodynamics, microstructure and mechanical properties (compressive strength at 25 degrees C) of the four alloys were analyzed, and the strengthening mechanism of TN20 alloy was studied. The compressive yield strength of the four alloys exceeds 2050 MPa, the ultimate compressive strength exceeds 2550 MPa, and the elongation exceeds 9%. The compressive yield strength of TN20 alloy is 2513 MPa, the ultimate strength is 3127 MPa, and the elongation is 11.38%. The room temperature (25 degrees C) compressive yield strength of TN20 alloy is the highest among the high entropy alloys studied so far. TN20 alloy is composed of BCC matrix phase and grain boundary phase containing three different structures, which are B2 TiNi phase, Ni55Nb25Ti15Ta5 phase generating stacking faults and Ni70Ti20Nb10 secondary precipitated phase. The micrometer matrix phase and nanometer grain boundary phase of TN20 alloy show a network distribution in fine crystal region. After the matrix phase cracks due to high thermal stress, the flow TiNi-rich grain boundary phases precipitate to fill the cracks. The grain boundary phase with high proportion in this region is enhanced by the secondary phase and its nanoprecipitated phase. In other regions, stacking faults are generated by the Ni55Nb25Ti15Ta5 phases, which convert the thermal stress that induces crack into lattice defects of the crystal. On the other hand, the content of B2 phase is the highest in grain boundary phase, and the grain boundary between B2 phase and matrix phase is a coherent grain boundary, which realizes the high quality combination of grain boundary phase and matrix phase. The design and strengthening of WNbMoTa-based nonequimolar RHEAs are studied in this paper, which is expected to provide a reference for the design of a new generation of high entropy alloy.

WReTaMo Refractory High‐Entropy Alloy with High Strength at 1600 °C

Carbide-reinforced Re0.1Hf0.25NbTaW0.4 refractory high-entropy alloy with excellent room and elevated temperature mechanical properties

Edge-dislocation-induced ultrahigh elevated-temperature strength of HfMoNbTaW refractory high-entropy alloys

Superior High‐Temperature Strength in a Supersaturated Refractory High‐Entropy Alloy

Outstanding specific yield strength of a refractory high-entropy composite at an ultrahigh temperature of 2273 K

High-temperature structural and mechanical stability of refractory high-entropy alloy Nb40Ti25Al15V10Ta5Hf3W2

The Microstructures, Mechanical Properties, and Deformation Mechanism of B2-Hardened NbTiAlZr-Based Refractory High-Entropy Alloys

Development of a Ti30Hf20Nb20Ta10V10Mo7W3 refractory high entropy alloy with excellent mechanical properties and wear resistance

A Nitride-Reinforced NbMoTaWHfN Refractory High-Entropy Alloy with Potential Ultra-High-Temperature Engineering Applications

A refractory medium-entropy alloy with ultrahigh specific yield strengths for elevated-temperature applications

Design of VNbTaMox Body‐Centered‐Cubic Refractory High‐Entropy Alloys with Excellent Ultrahigh‐Temperature Mechanical Properties and Ductility

Enhanced high-temperature strength of HfNbTaTiZrV refractory high-entropy alloy via Al2O3 reinforcement

Ta W Refractory Alloys with High Strength at 2000C

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

Microstructures and mechanical properties of novel MoTaVW refractory high-entropy alloys

High-temperature mechanical behaviors of a WTaRe refractory alloy manufactured by selective electron beam melting

Microstructures and Mechanical Properties of TixNbMoTaW Refractory High Entropy Alloys

Design and Coherent Strengthening of Ultra-High Strength Refractory High Entropy Alloys Based on Laser Additive Manufacturing

Microstructure and Mechanical Properties of Novel High-Strength, Low-Activation Wx(TaVZr)100-x (x = 5, 10, 15, 20, 25) Refractory High Entropy Alloys