Abstract:This work aims to elucidate the hot deformation behavior and microstructure evolution of a non-equimolar TiZrHf-rich refractory high-entropy alloy (RHEA) with a composition of Ti2ZrHfV0.5Ta0.2 (at. %). The as-cast Ti2ZrHfV0.5Ta0.2 alloy composed solely of a body-centered cubic phase showed superior tensile mechanical properties with a yield strength of 865 MPa and a total elongation of 22.5%. The uniaxial compression tests were performed at temperatures ranging from 900 to 1100 °C and strain rates varying from 10−3 to 10−1 s−1. The relation among the flow stress, deformation temperature, and strain rate was represented by the Arrhenius-type constitutive equations. The calculations show a comparatively low apparent activation energy of 144–119 kJ/mol over the entire range of strains, revealing a noticeable contradiction between the concentration of group IV elements (Ti, Zr, Hf) and the high-temperature strength. The excessive addition of Group IV elements tends to deteriorate the high-temperature strength due to the relatively low melting points and self-diffusion activation energies of Group IV elements. The misorientation analysis based on electron back-scattered diffraction indicated that the dynamic recrystallization mechanism depends strongly on the thermo-mechanical processing conditions. A low deformation temperature and high strain rate results in an abnormal discontinuous dynamic recrystallization mechanism. Additionally, the dominant role played by the edge dislocation in RHEAs during deformation is supposed to be the reason for the abnormal discontinuous dynamic recrystallization mechanism. A series of stress drops were observed under low deformation temperatures and high strain rates. Based on an interrupted hot-compression experiment and a strain aging experiment, the stress drop can be attributed to the unlocking of dislocations pinned by the Cottrell atmosphere or short-range ordering.

High-temperature mechanical behaviors of a WTaRe refractory alloy manufactured by selective electron beam melting

Microstructure and mechanical properties of a newly developed WTaRe refractory alloy by selective electron beam melting

Selective electron beam melting of WMoTaNbVFeCoCrNi refractory high-entropy alloy

Preparation and Properties of Tungsten-Rhenium Alloys Resistant to Ultra-High Temperatures

WReTaMo Refractory High‐Entropy Alloy with High Strength at 1600 °C

Ductile W0.4MoNbxTaTi refractory high-entropy alloys with excellent elevated temperature strength

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Preparation, Mechanical Properties and Strengthening Mechanism of W-Re Alloys: A Review

Enhanced high-temperature strength of HfNbTaTiZrV refractory high-entropy alloy via Al2O3 reinforcement

Ultrastrong, high plasticity, and softening-resistant refractory high-entropy alloy via stable isostructural coherent interfaces

Hot deformation behavior and microstructure evolution of non-equimolar Ti2ZrHfV0.5Ta0.2 refractory high-entropy alloy

Enhanced High-Temperature Strength of HfNbTaTiZrV Refractory High-Entropy Alloys by AI 2O 3 Reinforcement

Promoted room-temperature deformability and high-temperature strength synergy through zig-zag faceted interface design in TiNbTaWC 0.7 eutectic refractory high-entropy alloy

Microstructure and Mechanical Properties of WTaVCrTi Refractory High-Entropy Alloy by Vacuum Levitation Melting for Fusion Applications

Development of a Ti30Hf20Nb20Ta10V10Mo7W3 refractory high entropy alloy with excellent mechanical properties and wear resistance

High Strength and Tackling Structural Relaxation by Sub-Grains Synergistic Deformation in W-Re Alloy

Excellent room-temperature tensile ductility in as-cast Ti37V15Nb22Hf23W3 refractory high entropy alloys

Effect of tantalum concentration on the microstructure and mechanical properties of novel W–Ta-Re alloy

Microstructure and Mechanical Properties of Wire Arc Additively Manufactured MoNbTaWTi High Entropy Alloys

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

Microstructures and mechanical properties of novel MoTaVW refractory high-entropy alloys