Abstract:The NbTaHfTiZrV0.5 is a refractory multi-principal-element alloy with high strength and good ductility at room temperature. It is important for possible high-temperature applications to investigate the deformation mechanism of the NbTaHfTiZrV0.5 alloy at different temperatures using tensile tests. In this investigation, the tensile tests were conducted at room temperature to 1273 K on sheet materials fabricated by cold rolling combined with annealing treatments. At 473 K, the NbTaHfTiZrV0.5 alloy exhibited a high tensile ductility (12%). At a testing temperature range of 673~873 K, the ductility was reduced, but the yield strength remained above 800 MPa, which is rare in most other alloys. The TEM investigations revealed that a dislocation slip controlled the plastic deformation, and the degree of deformation was closely related to the dislocation density. The true stress–strain curves of the alloy under different deformation conditions were obtained by tensile deformation at different deformation temperatures (673~873 K) and strain rates (0.001~0.0005 s−1). Experimental results were utilized to construct the parameters of a constitutive model based on a traditional mathematical model to predict the flow behavior at high temperatures. The excellent high-temperature mechanical properties of the NbTaHfTiZrV0.5 alloy will enable it to be used in several engineering applications.

Ductile W0.4MoNbxTaTi refractory high-entropy alloys with excellent elevated temperature strength

Enhanced Mechanical Properties of HfMoTaTiZr and HfMoNbTaTiZr Refractory High-Entropy Alloys

Enhanced High-Temperature Strength of HfNbTaTiZrV Refractory High-Entropy Alloys by AI 2O 3 Reinforcement

Excellent room-temperature tensile ductility in as-cast Ti37V15Nb22Hf23W3 refractory high entropy alloys

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Temperature dependent deformation behavior and strengthening mechanisms in a low density refractory high entropy alloy Al10Nb15Ta5Ti30Zr40

Design of VNbTaMox Body‐Centered‐Cubic Refractory High‐Entropy Alloys with Excellent Ultrahigh‐Temperature Mechanical Properties and Ductility

Microstructural Evolutions and Mechanical Properties of Energetic Al1 (TiZrNbTaMoCr)15 High-Entropy Alloys

Microstructures and Mechanical Properties of TixNbMoTaW Refractory High Entropy Alloys

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Development of a Ti30Hf20Nb20Ta10V10Mo7W3 refractory high entropy alloy with excellent mechanical properties and wear resistance

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

A hypoeutectic high-entropy alloy with hierarchical microstructure for high-temperature application

Promoted room-temperature deformability and high-temperature strength synergy through zig-zag faceted interface design in TiNbTaWC 0.7 eutectic refractory high-entropy alloy

High-temperature mechanical behaviors of a WTaRe refractory alloy manufactured by selective electron beam melting

High-Temperature Mechanical Properties of NbTaHfTiZrV0.5 Refractory High-Entropy Alloys

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties