Abstract:The microstructure of high-entropy alloys with refractory elements and Al as constituents can be considered to be analogous to superalloys. These so-termed refractory high-entropy superalloys (RHSAs) can show remarkable compressive strength up to temperatures exceeding 1200 °C. Here, we examine the microstructure and properties - compressive, tensile, and fracture toughness - of a precipitation-hardened, body-centered cubic, RHSA, Al 0.5 Nb 1.25 Ta 1.25 TiZr, at ambient temperature (RT) to 1200 °C. Two dual-phase microstructures comprising ordered B2 (brittle) and disordered A2 (ductile) phases were produced in this alloy - one with B2 as the matrix, the other with A2 - for evaluation of the mechanical properties. Under compression, both microstructures display RT compressive strengths above 1.5 GPa and considerable ductility exceeding 40% at elevated temperatures; the alloy with the A2 matrix has ∼15% compressive ductility even at RT. However, properties are very different under tensile loading; at all temperatures, both microstructures fail predominately in an intergranular mode in the elastic regime at a fracture stress less than 200 MPa and ductility below 0.15%. The microstructure with the A2 matrix has a K Ic fracture toughness of ∼15 MPa√m at RT, although at all temperatures above 800 °C, measured K Ic values for both dual-phase microstructures are less than 5 MPa√m. In this study, we investigate the microstructural origin of these mechanical properties, and emphasize the importance of evaluating these alloys in tension.

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Microstructure and Mechanical Properties of the Ti62Nb12Mo12Ta12W2 Refractory High Entropy Alloy Prepared through Spark Plasma Sintering

Microstructure and mechanical properties of lightweight Al CrNbTiV(x = 0.2, 0.5, 0.8) refractory high entropy alloys

Microstructure and Mechanical Properties of Refractory MoNbHfZrTi High-Entropy Alloy

Temperature dependent deformation behavior and strengthening mechanisms in a low density refractory high entropy alloy Al10Nb15Ta5Ti30Zr40

Tensile creep behavior of the Nb45Ta25Ti15Hf15 refractory high entropy alloy

Compressive vs. tensile yield and fracture toughness behavior of a body-centered cubic refractory high-entropy superalloy Al 0.5 Nb 1.25 Ta 1.25 TiZr at temperatures from ambient to 1200°C

Microstructure and mechanical properties of lightweight Al<i><sub>x</sub></i>CrNbTiV(<i>x</i>=0.2, 0.5, 0.8) refractory high entropy alloys

Microstructures and mechanical properties of HfNbTaTiZrW and HfNbTaTiZrMoW refractory high-entropy alloys

Phase Stability and Microstructural Evolution in a Ductile Refractory High Entropy Alloy Al 10 Nb 15 Ta 5 Ti 30 Zr 40

Microstructure and wear behavior of a refractory high entropy alloy

Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys

Microstructure and elevated-temperature mechanical properties of refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy fabricated by powder metallurgy

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Ductile W0.4MoNbxTaTi refractory high-entropy alloys with excellent elevated temperature strength

Microstructure and Mechanical Properties of Alx(TiZrTa0.7NbMo) Refractory High-Entropy Alloys

The Microstructures, Mechanical Properties, and Deformation Mechanism of B2-Hardened NbTiAlZr-Based Refractory High-Entropy Alloys