Abstract:Intense research efforts are focused on the development of advanced high-entropy alloys intended for premium aerospace components and other applications, where high strength and good formability are crucial. The mechanical properties of these alloys are closely related to the phase transformation, dislocation evolution, and grain size, and these factors are affected by the deformation temperature. The response of the retained austenite to strain-induced martensitic transformation at various temperatures was studied in an advanced Ti68Nb7Ta3Zr4Mo18 (at.%) high-entropy alloy via molecular dynamics simulation. It was found that the Ti68Nb7Ta3Zr4Mo18 alloy changes from a single crystal to a polycrystal during the tensile process, and the transition of the Ti68Nb7Ta3Zr4Mo18 (at.%) high-entropy alloy from the BCC phase to the FCC phase occurs. At high temperatures and low strain rates, grain boundary slip is the main deformation mechanism, and at low temperatures and high strain rates, dislocation slip replaces grain boundary slip as the dominant deformation mechanism, which improves the strength of the alloy. Moreover, when the grain size is too small, the strength of the alloy decreases, which does not satisfy the fine grain strengthening theory and shows an inverse Hall-Petch relationship. This study offers a new compositional window for the additive manufactured lightweight high-strength material categories for various applications including the aerospace industry.

Microstructure and Mechanical Properties of the Ti62Nb12Mo12Ta12W2 Refractory High Entropy Alloy Prepared through Spark Plasma Sintering

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Microstructure and elevated-temperature mechanical properties of refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy fabricated by powder metallurgy

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

Microstructural Evolutions and Mechanical Properties of Energetic Al1 (TiZrNbTaMoCr)15 High-Entropy Alloys

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

Microstructure and Mechanical Properties of A Refractory Hfnbtivsi0.5 High-Entropy Alloy Composite

Preparation of Bulk TiZrNbMoV and NbTiAlTaV High-Entropy Alloys by Powder Sintering

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Microstructure Recrystallization and Mechanical Properties of a Cold-Rolled TiNbZrTaHf Refractory High-Entropy Alloy

Investigation of the Micromechanical Behavior of a Ti68Nb7Ta3Zr4Mo18 (at.%) High-Entropy Alloy

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

Study on mechanical alloying behavior and thermal stability of HfMoNbTaTi refractory high-entropy alloy

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Microstructure and mechanical properties of multi-phase reinforced Hf-Mo-Nb-Ti-Zr refractory high-entropy alloys

Effect of Mechanical Alloying and Sintering Behavior on the Microstructure and Properties of NbMoTaWRe Refractory High Entropy Alloy

Microstructure and strengthening mechanisms of novel lightweight TiAlV0.5CrMo refractory high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys