Abstract:This work aims to elucidate the hot deformation behavior and microstructure evolution of a non-equimolar TiZrHf-rich refractory high-entropy alloy (RHEA) with a composition of Ti2ZrHfV0.5Ta0.2 (at. %). The as-cast Ti2ZrHfV0.5Ta0.2 alloy composed solely of a body-centered cubic phase showed superior tensile mechanical properties with a yield strength of 865 MPa and a total elongation of 22.5%. The uniaxial compression tests were performed at temperatures ranging from 900 to 1100 °C and strain rates varying from 10−3 to 10−1 s−1. The relation among the flow stress, deformation temperature, and strain rate was represented by the Arrhenius-type constitutive equations. The calculations show a comparatively low apparent activation energy of 144–119 kJ/mol over the entire range of strains, revealing a noticeable contradiction between the concentration of group IV elements (Ti, Zr, Hf) and the high-temperature strength. The excessive addition of Group IV elements tends to deteriorate the high-temperature strength due to the relatively low melting points and self-diffusion activation energies of Group IV elements. The misorientation analysis based on electron back-scattered diffraction indicated that the dynamic recrystallization mechanism depends strongly on the thermo-mechanical processing conditions. A low deformation temperature and high strain rate results in an abnormal discontinuous dynamic recrystallization mechanism. Additionally, the dominant role played by the edge dislocation in RHEAs during deformation is supposed to be the reason for the abnormal discontinuous dynamic recrystallization mechanism. A series of stress drops were observed under low deformation temperatures and high strain rates. Based on an interrupted hot-compression experiment and a strain aging experiment, the stress drop can be attributed to the unlocking of dislocations pinned by the Cottrell atmosphere or short-range ordering.

Microstructural Evolutions and Mechanical Properties of Energetic Al1 (TiZrNbTaMoCr)15 High-Entropy Alloys

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

High-strength and energetic Al2Ti6Zr2Nb3Ta3 high entropy alloy containing a cuboidal BCC/B2 coherent microstructure

Microstructure and elevated-temperature mechanical properties of refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy fabricated by powder metallurgy

Formation of coherent BCC/B2 microstructure and mechanical properties of Al–Ti–Zr–Nb–Ta–Cr/Mo light-weight refractory high-entropy alloys

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Microstructure and Mechanical Properties of the Ti62Nb12Mo12Ta12W2 Refractory High Entropy Alloy Prepared through Spark Plasma Sintering

Compressive vs. tensile yield and fracture toughness behavior of a body-centered cubic refractory high-entropy superalloy Al 0.5 Nb 1.25 Ta 1.25 TiZr at temperatures from ambient to 1200°C

Phase evolution and mechanical properties of low-activation refractory high-entropy alloy Ti1.5ZrV0.5Ta0.5

The Microstructures, Mechanical Properties, and Deformation Mechanism of B2-Hardened NbTiAlZr-Based Refractory High-Entropy Alloys

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

Hot deformation behavior and microstructure evolution of non-equimolar Ti2ZrHfV0.5Ta0.2 refractory high-entropy alloy

Microstructure and mechanical properties of lightweight Al CrNbTiV(x = 0.2, 0.5, 0.8) refractory high entropy alloys

Microstructure and Mechanical Properties of TaNbVTiAlx Refractory High-Entropy Alloys

Microstructures and mechanical properties of Ta–Nb–Zr–Ti–Al refractory high entropy alloys with varying Ta/Ti ratios

Investigation of the Micromechanical Behavior of a Ti68Nb7Ta3Zr4Mo18 (at.%) High-Entropy Alloy

Phase Stability and Microstructural Evolution in a Ductile Refractory High Entropy Alloy Al 10 Nb 15 Ta 5 Ti 30 Zr 40

The evolution of compositional and microstructural heterogeneities in a TaMo0.5ZrTi1.5Al0.1Si0.2 high entropy alloy

Temperature-dependent microstructural evolutions and deformation mechanisms of (Ni2Co2FeCr)92Al4Nb4 high-entropy alloys

Microstructures and Mechanical Properties of AlCrFeNiMo 0.5 Ti X High Entropy Alloys