Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

High Strength and Tackling Structural Relaxation by Sub-Grains Synergistic Deformation in W-Re Alloy

Preparation, Mechanical Properties and Strengthening Mechanism of W-Re Alloys: A Review

Strengthening effect of rhenium on different substitution positions of tungsten nanofilm at high temperature: DFT and molecular dynamics simulation

Evolution of Microstructure and Mechanical Properties of Warm-Rolled W10Re Alloy During Annealing at 1500 °C

Annealing Characteristics and Mechanism Interpretation of High-Performance Swaged W-Y2O3 Alloy

Enhanced Tensile Ductility of Tungsten Microwires Via High-Density Dislocations and Reduced Grain Boundaries

The High Thermal Stability Induced by a Synergistic Effect of ZrC Nanoparticles and Re Solution in W Matrix in Hot Rolled Tungsten Alloy

Preparation and Properties of Tungsten-Rhenium Alloys Resistant to Ultra-High Temperatures

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Unveiling the Intrinsic Rhenium Effect in Tungsten

High-temperature tensile and thermal shock characterization of low-temperature rolled tungsten

Excellent room-temperature tensile ductility in as-cast Ti37V15Nb22Hf23W3 refractory high entropy alloys

Effect of rotary swaging and subsequent annealing on microstructure and mechanical properties of W-1.5ZrO2 alloys

High-temperature mechanical behaviors of a WTaRe refractory alloy manufactured by selective electron beam melting

WReTaMo Refractory High‐Entropy Alloy with High Strength at 1600 °C

Microstructure and mechanical properties of a newly developed WTaRe refractory alloy by selective electron beam melting

Recrystallization behavior of pure tungsten hot-rolled with high accumulated strain during annealing at 1250 C-1350 C

Microstructure, mechanical behaviour and fracture of pure tungsten wire after different heat treatments

Evolution of microstructure and texture of moderately warm-rolled pure tungsten during annealing at 1300 °C

The preparation process of ultrafine gain W-Re powder by wet chemical method and its effect on alloy properties

Microstructural evolution and hot deformation behavior of W-3Re-5HfC alloy