Abstract:Dynamic α precipitation with hot deformation is commonly adopted to obtain equiaxed α for tailoring the mechanical properties of Ti alloys. The formation of an equiaxed shape rather than the typically observed α plate is closely correlated with the variations in nucleation rate and elastic strain energy induced by the external stress. However, it is still unclear how these changes result in the morphology transition of α precipitate. In this study, a multiphase-field and crystal plasticity integrated model was proposed to describe the coevolution of dynamic α precipitation and plastic deformation. It was found that the plasticity relaxes the elastic strain energy, retards lengthening but promotes the thickening of α precipitate. The elastic interaction between the applied stress and eigenstrain increases the elastic strain energy, promotes lengthening but has a weak effect on the thickening of α precipitate. The competition of these two factors determines the shape of α precipitates. In the case of a small nucleation rate, the promotion effect of the elastic interaction on lengthening of α precipitate always exceeds the retardation effect of plasticity, resulting in the formation of plate-like α. Increasing the nucleation rate under the same magnitude of external stress can induce a larger plastic strain within the soft β matrix in the initial growth stage, which results in the competitive advantage of the retardation effect of plasticity. Therefore, the lengthening of α precipitate decreases to a similar extent as its thickening, and the precipitate morphology changes into an equiaxed shape.

A study of crystallography of α precipitates in a Ti-8 wt% Fe alloy

Growth morphology and crystallography of precipitate in a new high-temperature structural intermetallic Ti–40Al–10Fe

Crystallography and diffraction patterns of the precipitates in Cu-3 wt% Ti alloy

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

TEM characterization of the precipitation reaction in Ti–48Al–10Nb alloy

The Role of Cuboidal Ω Precipitates on Α Precipitation in a Ti-20V Alloy

Near-coincidence-sites modeling of the edge facet dislocation structures of α precipitates in a Ti–7.26 wt.% Cr alloy

Orientation Relationship and Interfacial Structure Between Ζ-Ti5si3 Precipitates and Γ-Tial Intermetallics

A TEM study of the habit plane structure of intragrainular proeutectoid α precipitates in a Ti–7.26 wt%Cr alloy

Diffraction Analysis of Α-Fe Precipitates in a Polycrystalline Cu–Fe Alloy

Dislocation Network on the Curved End Face of Α Precipitates in a Ti-8 Wt.% Fe Alloy

Understanding the formation of equiaxed α during dynamic precipitation in titanium alloys by elastoplastic phase field simulation

TEM Characterization of Plate-Shaped L12-(Al,Ag)3Ti Precipitates in a Ag-modified TiAl Based Intermetallics

Crystallographic ordering of Al and Sn in α-Ti

Structures and Migrations of Interfaces Between Β Precipitates and Α′ Matrix in a Ti-2.6 Wt% Mo Alloy

Characterization of the Interfacial Structure of Coarse α Precipitates in a Metastable β-Ti Alloy Ti-5Al-5Mo-5V-3Cr

The precipitation reaction in a Ag-modified TiAl based intermetallic, as studied by TEM

Crystalline Characteristics of Alpha Precipitates in Ti–15V–3Sn–3Al–3Cr Alloy

Atomic-scale analysis of early-stage precipitation in Ti(Al,Si)3 alloy

Dislocation Structure of Non-Habit Plane of Α Precipitates in a Ti–7.26 Wt.% Cr Alloy

Precipitation crystallography of plate-shaped Al 6(Mn,Fe) dispersoids in AA5182 alloy