Abstract:Ti exhibits complex plastic deformation controlled by active dislocation and twinning systems. Understandings on dislocation cores and twin interfaces are currently not complete or quantitative, despite extensive experimental and simulation studies. Here, we determine the dislocation core, twin, and crack properties in both HCP and BCC Ti using a Deep Potential (DP), DFT and linear elastic fracture mechanics. We compute the core structures, critical resolved shear stresses and mobilities of the 〈a〉 , 〈c+a〉 , 〈c〉 dislocations in HCP and the 〈111〉/2 dislocations in BCC Ti. The 〈a〉 slip consists of slow core migration on pyramidal-I planes and fast migration on prism-planes, and is kinetically limited by cross-slips among them. This behaviour is consistent with "locking-unlocking" phenomena in TEM and is likely an intrinsic property. Large-scale DFT calculations provide a peek at the screw 〈c+a〉 core and glide behaviour, which is further quantified using DP-Ti. The screw 〈c+a〉 is unstable on pyramidal-II planes. The mixed 〈c+a〉 is nearly sessile on pyramidal-I planes, consistent with observations of long dislocations in this orientation. The edge and mixed 〈c+a〉 are unstable against a pyramidal-to-basal (PB) transition and become sessile at high temperatures, corroborate the difficulties in 〈c〉 -axis compression of Ti. Cracks on basal planes are predicted and shown to be intrinsically brittle, consistent with cleavage facets primarily on this plane in experiments. Twin boundary energies vary considerably but all twin boundary structures possess a mirror reflection symmetry. Finally, in BCC Ti, the 〈111〉/2 screw has a degenerate core with average glide on {112} planes; the 〈111〉/2 edge and mixed dislocations have non-dissociated cores on {110} planes. This work paints a self-consistent, complete picture on all dislocations in Ti, rationalises previous experimental observations on Ti plasticity and fracture, and points to future HRTEM examinations of unusual dislocations such as the mixed and PB transformed 〈c+a〉 cores.

Near-coincidence-sites modeling of the edge facet dislocation structures of α precipitates in a Ti–7.26 wt.% Cr alloy

Minimum Interface Misfit Criterion for the Precipitation Morphologies of TCP Phases in a Ni-based Single Crystal Superalloy

Dislocation Structure of Non-Habit Plane of Α Precipitates in a Ti–7.26 Wt.% Cr Alloy

A TEM study of the habit plane structure of intragrainular proeutectoid α precipitates in a Ti–7.26 wt%Cr alloy

An Extended Near-Coincidence-sites Method and the Interfacial Structure of Austenite Precipitates in a Duplex Stainless Steel

A study of crystallography of α precipitates in a Ti-8 wt% Fe alloy

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Structures and energetics of semicoherent interfaces of precipitates in hcp/bcc systems: A molecular dynamics study

Characterization of the Interfacial Structure of Coarse α Precipitates in a Metastable β-Ti Alloy Ti-5Al-5Mo-5V-3Cr

Atomistic Simulation of Interactions Between an Edge Dislocation and Cu Precipitates with Different Chemical Compositions in Α-Fe

Inclined θ′ precipitates with terraced Cu/Mn-rich multilayers in Al–Cu alloys

Structures and Migrations of Interfaces Between Β Precipitates and Α′ Matrix in a Ti-2.6 Wt% Mo Alloy

A TEM study of the crystallography and interphase boundary structure of α precipitates in a Zr-2.5 wt% Nb alloy

A combined simulation and experimental study of the equilibrium shapes of η' and α precipitates in Mn-containing 7xxx Al-alloys

Secondary Coincidence Site Lattice Model for Truncated Triangular β-Mg 2 Sn Precipitates in a Mg-Sn-Based Alloy

Transmission Electron Microscopy Investigation and Interpretation of the Morphology and Interfacial Structure of the ∊′-Mg54ag17precipitates in an Mg–Sn–Mn–Ag–Zn Alloy

Orientation Relationship and Interfacial Structure Between Ζ-Ti5si3 Precipitates and Γ-Tial Intermetallics

Crystallography and diffraction patterns of the precipitates in Cu-3 wt% Ti alloy

A Near Row Matching Approach to Prediction of Multiple Precipitation Crystallography of Compound Precipitates and Its Application to a Mg/Mg 2 Sn System

Modelling of dislocations, twins and crack-tips in HCP and BCC Ti

Crack nucleation and dislocation activities in titanium alloys with the strong transverse texture: insights for enhancing dwell fatigue resistance