Abstract:Electrically conductive adhesives were made using silver-coated copper powders (filler) and epoxy. Resistivity, microstructure and shear strength of prepared adhesives were studied using two-point resistance measurements, Scanning Electron Microscope (SEM) and universal tensile tests, respectively. Effect of filler concentration (70–85 wt%), silver concentration (10–50 wt%), particles morphology (flake or spherical) and addition of graphite (2–15 wt%) were investigated on prepared adhesives properties. Results showed that by increasing the filler percentage from 70 to 85 wt%, the electrical resistivity decreases from 6.2 × 10−3 to 3 × 10−3 Ω·cm. Furthermore, the electrical resistivity of adhesives is proportional to the silver content of the filler particles. Regarding the morphological effect of filler particles, it was found that by replacing 40 wt% of the flake with spherical particles in the adhesive with a filler content of 75 wt%, the electrical resistivity of the adhesive reduces from 5.6 × 10−3 to 4.5 × 10−3 Ω·cm, while the electrical resistivity of the adhesive containing 50 wt% of the spherical particles reached to 1.1 × 10−2 Ω·cm. Graphite addition to adhesive formula in concentrations less than 6 wt%, slightly lowered the resistivity of the adhesives. Increasing the graphite addition from 6 to 15 wt% enhanced the electrical resistivity from 2.8 × 10−3 to 1.7 × 10−2 Ω·cm. The shear strength of the adhesives is inversely proportional to the filler percentage in the adhesives.

Preparation of micron-scale Cu@Ag conductive particles by displacement coating to reinforce epoxy conductive adhesives

Effect of Flake Silver-Plated Copper Particles on the Property Enhancement of Electrically Conductive Adhesives.

Preparation of silver nanopowders and its application in low temperature electrically conductive adhesive

Preparation and characterization of Ag conductive adhesive with low resistivity

Preparation of MXene and its application in low temperature electrically conductive adhesive

Uniformly Coated Cu@Ag Core-shell Particles with Low Silver Content: Hydroxy Acid as a Complexing Agent with "Double-sided Adhesive" Function

Effect of Ti3C2Tx/Ag/MWCNTs/Ag MXene fillers on the electrical conductivity of Ag-coated Cu conductive adhesives

Scalable Synthesis of Monodispersed Branched Submicron Silver Particles As the Printed Electrically Conductive Adhesives Fillers

Surface Treatment of Micron Silver Flakes with Coupling Agents for High-Performance Electrically Conductive Adhesives

Silver coated copper powder conductive adhesive and preparation method thereof

Effect of MXene fillers on the electrical conductivity of Ag-coated Cu conductive adhesives

Electrical properties of electrically conductive adhesives from epoxy and silver-coated copper powders after sintering and thermal aging

Regulation of Multidimensional Silver Nanostructures for High-Performance Composite Conductive Adhesives

Microstructure, resistivity, and shear strength of electrically conductive adhesives made of silver-coated copper powder

Fabrication of Interconnected Silver Flakes for Conductive Adhesives Through Dopamine-Induced Surface Functionalization

MXene fillers and silver flakes filled epoxy resin for new hybrid conductive adhesives

Facile preparation of high conductive silver electrodes by dip-coating followed by quick sintering.

Preparation of Low Volatile Organic Compounds Silver Paste Containing Ternary Conductive Fillers and Optimization of Their Performances

The synergistic effect of micron spherical and flaky silver-coated copper for conductive adhesives to achieve high electrical conductivity with low percolation threshold

Novel Cu@Ag Micro/Nanoparticle Hybrid Paste and Its Rapid Sintering Technique via Electromagnetic Induction for High-Power Electronics

Microstructure Regulation and Fabrication of Epoxy-based Conductive Films with Excellent Electrical and Thermal Conductivity, Adhesion, Toughness, and Flexibility