Abstract:A new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN based on the idea of substituting C with N, proper Mo addition, and proper Si and V subtraction was designed, exhibiting higher microstructure and hardness stability than the frequently-used H13 steel. The results showed that the softening mechanism consisted of the coarsening and decomposition of laths, the formation and coarsening of precipitates, the annihilation and rearrangement of dislocations and the formation of sub-grains. The superior thermal stability of 3Cr5Mo2SiVN steel could be attributed to the low precipitate and dislocation recovery. First, the higher activation energy inhibited the diffusion of alloying elements, thus delaying the formation and coarsening of precipitates. Second, the undissolved M(C, N) exhibited a higher solid solution temperature than the undissolved MC, and M 3 C had a stronger heat absorption ability. In addition, the nano‐carbonitride M(C, N) exhibited lower lattice disregistry and interface energy than the nano-carbide MC. Hence, the undissolved M(C, N), M 3 C and nano‐carbonitride M(C, N) showed a higher precipitate stability. Third, in terms of dislocation evolution, the higher stability of lattice constant and solid solution of interstitial atoms as well as the smaller carbide size and lower precipitation content significantly inhibited the dislocation recovery. The preservation of prior austenite grain boundaries and lath boundaries effectively hindered the dislocation migration. After isothermal tempering at 580, 600 and 620 °C for 96 h, the hardness decreased to 41.1, 35.4 and 31.7 HRC with softening rate 4.6, 8.5 and 10.0 for 3Cr5Mo2SiVN steel, and 35.2, 29.3 and 28.1 HRC with softening rate 7.2, 11.2 and 11.5 for H13 steel. The difference in hardness and softening rate at 600 °C was the most prominent, attaining respective values of 6.1 HRC and 2.7, respectively.

Decomposition behavior and evolution mechanism of MC primary carbonitride at 1473K and 1523K in die steel

Effects of Ti and N Contents on the Characteristic Evolution and Thermal Stability of MC Carbonitrides Holding at 1250 °C in H13 Die Steel

Primary MC Decomposition and Its Effects on the Rupture Behaviors in Hot-Corrosion Resistant Ni-based Superalloy K444

Microstructure of a novel Ni-Cr-W-Mo-V containing ductile iron and decomposition behavior of its eutectic carbides at elevated temperature

A Study of Decomposition of Supercooled Austenite in High-Strength Medium-Carbon Complexly Alloyed Cold-Resistant Steels

Transformation behavior of primary MC and M 2 C carbides in Cr4Mo4V steel

Research on the Phase Transformation of a Newly Developed Carbonitride-Strengthened Martensitic Heat Resistant Steel

Evolution Behavior and Fracture Criterion of Carbides in D2 Cold‐Work Die Steel During Hot Working Process

The microstructure evolution and its effect on the mechanical properties of a hot-corrosion resistant Ni-based superalloy during long-term thermal exposure

Study on Evolution Behavior of Carbides in Industrial‐Grade American Iron and Steel Institute M35 High‐Speed Steel Produced by Electroslag Remelting

Formation and evolution of primary carbides in high-carbon martensitic stainless steel

Microstructural Evolution of a High W Content Ni-Based Superalloy at γ′ Sub-Solvus Temperatures

Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: in-situ characterisation and phase-field modelling

High-temperature oxidation behavior and subsurface phase transformation of high-Mn high-Al steel

Microstructural Stability and Softening Resistance of a Novel Hot-Work Die Steel

Tensile, Creep Behavior and Microstructure Evolution of an As-Cast Ni-based K417G Polycrystalline Superalloy

MC decomposition and boride formation in a next generation polycrystalline Ni based superalloy during isothermal exposure at 900 °C

Investigation into the thermal stability of a novel hot-work die steel 5CrNiMoVNb

Constitutive Equation and Hot Deformation Behavior of SLM-GH3536 Alloy

Thermal stability and softening mechanism of a new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN

Effect Of Steam Temperature On Oxidation Behavior Of Gh2984 Alloy As A Candidate For 700 Degrees C Advanced Ultra-Supercritical Boilers