Abstract:KAERI (Korea Atomic Energy Research Institute) has been performing the project named KOMAC (Korea Multi-purpose Accelerator Complex) within the frame work of national mid and long term nuclear research plan. The final objectives of KOMAC is to build a 20-MW (1 GeV and 20 mA) cw (100% duty factor) proton linear accelerator. As the first stage, the low energy accelerator up to 20 MeV is being developed in KTF (KOMAC Test Facility). The low energy accelerator consists of an injector, RFQ, CCDTL, and RF systems. The proton injector with Duoplasmatron ion source has been developed, and the LEBT with solenoid lens is under development. The RFQ linac that will accelerate a 20mA proton beam from 50keV to 3MeV has been designed and is being fabricated. The RF system for RFQ is being developed, and the CCDTL up to 20MeV is being designed. The status of the low energy accelerator will be presented.

What problem does this paper attempt to address?

This paper aims to solve the development problems of the low - energy proton accelerator in the Korea Multi - Purpose Accelerator Complex (KOMAC) project. Specifically, the goal of the paper is to design and construct a low - energy accelerator system that can accelerate the proton beam from 50 keV to 20 MeV and ensure its stable operation in the continuous - wave (cw) mode. The following are the key issues that the paper attempts to solve: 1. **Development of low - energy accelerator**: - **Final goal**: To construct a 20 MW (1 GeV and 20 mA) continuous - wave proton linear accelerator. - **First - stage goal**: To develop a low - energy accelerator capable of accelerating the proton beam to 20 MeV and conduct debugging in the KOMAC Test Facility (KTF). 2. **Development of key components**: - **Injector**: Develop a proton injector with a Duoplasmatron ion source to provide a stable high - current proton beam. - **Low - Energy Beam Transport Line (LEBT)**: Design and construct a low - energy beam transport line for transporting and matching the proton beam into the Radio - Frequency Quadrupole (RFQ) accelerator. - **Radio - Frequency Quadrupole (RFQ) accelerator**: Design and manufacture an RFQ that can accelerate the proton beam from 50 keV to 3 MeV. - **Coupled - Cavity Drift - Tube Linac (CCDTL)**: Research and design the CCDTL structure for accelerating the proton beam from 3 MeV to 20 MeV. 3. **Ensuring the stability and reliability of the system**: - **Thermal management**: Solve the heat load problems in the RFQ and CCDTL structures and ensure the effectiveness and stability of the cooling system. - **Minimization of beam loss**: Reduce beam loss and improve transmission efficiency by optimizing the designs of the LEBT and RFQ. 4. **Verification and testing**: - **Cold - model test**: Verify the design parameters of the CCDTL, such as resonant frequency, Q - value and field distribution, through cold - model tests. - **Prototype test**: Conduct electrical and vacuum tests on the prototypes of the RFQ and CCDTL to ensure that their performance meets the design requirements. In summary, this paper mainly focuses on the design, manufacturing and testing of each component of the low - energy accelerator in the KOMAC project to achieve the stable acceleration of the 20 MeV proton beam and lay the foundation for the construction of subsequent higher - energy accelerators.

Development of the Low Energy Accelerator for Komac

HIGH POWER RF SYSTEM FOR KOMAC RFQ

Study on the microwave ion source of 100-MeV proton linac

Development and integration of DAQ system for beam current monitoring of the KOMAC linac and beamlines

Measurement of the Neutron Energy Spectra by Using Organic Scintillators at the Beam Dump of the 100-MeV Proton Linear Accelerator in the KOMAC

Accelerator control system at KEKB and the linac

Design study for medium energy high intensity proton accelerator

Development of a Hybrid Power Supply and RF Transmission Line for SANAEM RFQ Accelerator

Status Report on the Low-Energy Demonstration Accelerator (LEDA)

An RF power system for NSP high intensity proton accelerator at JAERI

Linear IFMIF Prototype Accelerator (LIPAc) Radio Frequency Quadrupole's (RFQ) RF couplers enhancement towards CW operation at nominal voltage

Development of RF system for RAON superconducting linear accelerator

Accelerating Structure design and fabrication For KIPT and PAL XFEL

The Ka-Band High Power Klystron Amplifier Design Program of INFN

High-gradient performance of a prototype accelerator cavity for a 3 GeV proton radiography booster

Achievement of high-current continuous-wave deuteron injector for Linear IFMIF Prototype Accelerator (LIPAc)

DEVELOPMENT OF HIGH CURRENT 201 . 25 MHz

PHYSICAL DESIGN OF 4 MeV / 2 . 5 ACCELERATOR *

Design, Fabrication, and Testing of an X-band 9-Mev Standing-Wave Electron Linear Accelerator

Current Status of the SANAEM RFQ Accelerator Beamline

Low-energy Ion Beam Diagnostics: An Integrated Solution