Abstract:Background Boron neutron capture therapy (BNCT) is a next‐generation radiotherapy, utilizing both an external neutron beam and a 10B ‐containing pharmaceutical. A compact accelerator for a high intensity neutron source was installed to conduct BNCT in a hospital. The dose administered to a patient was evaluated by measuring the proton beam current. Purpose Neutron intensity should be monitored in real‐time by measuring the neutrons emitted from the target during BNCT irradiation. This is crucial due to potential neutron target degradation. Online neutron beam monitoring systems are required for reliable measurements of the administered neutron dose. An online neutron beam monitoring system was developed to monitor neutron intensity irradiating on the patient at the National Cancer Center Hospital (NCCH). Methods The neutron detector comprised a back‐illuminated thin Si diode of 40‐μm thickness and an ultrathin natural LiF neutron converter of 0.05‐μm thickness. The neutron detector was installed on the neutron target unit, regardless of whether a patient was present, without any additional modifications to the setup. The response functions for high photon dose rates of upto 100 Gy/h were measured. The pulse heights were measured using the neutron beam monitor during BNCT neutron irradiation. Neutron temporal response measured using the online beam monitor was acquired and compared with the proton beam current and the measurements at a patient position. From this measurement at the patient position, the neutron fluence rate irradiating on a patient was obtained. Results The neutron events were separated from the photon events. The neutron counting rates increased rapidly with the starting of proton beam irradiation and dropped to zero upon its termination. During intermittent drops and recoveries in the proton beam, the neutron beam monitor for counting rates responded quickly, synchronizing with the beam current. A scatter plot of the neutron counting rate and proton beam current indicated a good linear correlation. A direct relationship between the online neutron beam monitor's neutron counting rates and those of the patient neutron detector showed a good correlation coefficient of 0.84. A ratio of the both neutron counting rates showed a standard deviation of 6%. The correlation coefficient and standard deviation were improved to 0.94 and 1.5%, by re‐binning the neutron temporal response with longer acquisition period than 1 s. Using the online neutron beam monitor, the neutron fluence rate was obtained from the direct relationship within 1.5%. Therefore, real‐time monitoring of neutron intensity was achieved within the acceptable level as per the International Commission on Radiation Units and Measurements report. Conclusions The online neutron beam monitoring system was developed to monitor the BNCT neutron beam intensity at NCCH. The temporal response of the neutron beam monitor was synchronized with the neutron counting rate at the patient position. Using the online neutron beam monitor, the neutron fluence rate irradiating on the patient can be monitored from the direct relationship. Fluctuation of the neutron beam intensity through BNCT irradiation and the degradation of the lithium target through the lifespan of the neutron target could be monitored using the neutron beam monitor.

Measurement of the Neutron Energy Spectra by Using Organic Scintillators at the Beam Dump of the 100-MeV Proton Linear Accelerator in the KOMAC

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

Study on the microwave ion source of 100-MeV proton linac

Measurement of the Neutron Spectra Inside and Outside the Target Room of the 65 MeV Electron LINAC using an Extended Bonner Sphere

Simultaneous measurement of organic scintillator response to carbon and proton recoils

Measurement and simulation of the new liquid organic scintillator response to fast neutrons

Development of the Low Energy Accelerator for Komac

Measurements of Photoneutrons Produced by A 15 Mev Electron Linac for Radiography Applications

Generation of neutron spectra and emission yields from proton-induced reactions on nat C and nat Li targets using CR-39 detectors

Measurement of -ray production via the neutron- reaction using a 77 MeV quasimonoenergetic neutron beam

Performance evaluation of electron multiplier tubes as a high-intensity muon beam monitor of accelerator neutrino experiments

Measurements of AmBe and PuC spectra using EJ309 and stilbene scintillators

Measurement of 107-MeV proton-induced double-differential thick target neutron yields for Fe, Pb, and Bi using a fixed-field alternating gradient accelerator at Kyoto University

Performance of A Large Volume Liquid Scintillation Detector for the Measurement of Fast Neutrons

Development of an online neutron beam monitoring system for accelerator‐based boron neutron capture therapy in a hospital

Acquiring Gamma-Ray Energy Spectrum Using a Plastic Scintillation Optical Fiber Detector

Design and performance evaluation of a compact thermal and fast neutron spectrometer

Low Energy Light Yield of Fast Plastic Scintillators

Fast Neutron Detector for Fusion Reactor KSTAR Using Stilbene Scintillator

Investigating High-Energy Proton-Induced Reactions on Spherical Nuclei: Implications for the Pre-Equilibrium Exciton Model

A Modified Neutron Dose-Equivalent Meter for Pulsed Neutron Radiation Field