Abstract:Author(s): Guo, Zheng | Advisor(s): Nikolic, Borivoje | Abstract: Continued increase in the process variability is perceived to be a major roadblock for future technology scaling. Its impact is particularly pronounced in large memory arrays due to both the utilization of minimum sized transistors and their extremely large data capacity. In order to enable the continued scaling of the next-generation embedded SRAM, the ability to monitor and characterize, on-chip, the variations in SRAM functionality and performance becomes critical for both gaining a deeper understanding of the sources of variability and for developing more robust circuits and topologies. This work presents a methodology to characterize, directly, the impact of process variability on the functionality of large SRAM-based cache memories - capable of collecting massive silicon data at little hardware and/or design overhead. In addition, a thorough investigation of various SRAM read stability and writeability metrics, including the proposed large-scale design metrics, is conducted to further understand the utility of each metric for SRAM yield prediction. The large-scale characterization methodology is validated on two different test chips, fabricated in an early commercial low-power 45nm CMOS process. This method can be easily extended to capture more than 6 standard deviations of parameter variations by increasing the SRAM array size, and therefore can serve as a valuable addition to the next-generation SRAM development vehicle.The enablement of future SRAM scaling will require technology and circuit co-design. The FinFET technology is particularly attractive for nanoscale SRAM design not only for its reduced σVTH and better control of the short channel effects (SCE), but also for the architectural flexibility enabled by its unique independently-gated (IG) operation. New bitcell designs are presented to take advantage of this IG operation in the form of a dynamic pass-gate feedback (PGFB). It is shown that the IG FinFET design using dynamic PGFB can both dramatically enhance the read stability of a 6-T SRAM cell and enable the practical design of a 4-T SRAM cell. While increased variability presents a formidable challenge for future SRAM scaling, the presented methodologies, both in testing and design, can facilitate its continuation.

Characteristic Comparison of SRAM Cells with 20 nm Planar MOSFET, Omega FinFET and Nanowire FinFET

On the SRAM with Comb-Shaped Nano FETs Advancing to 3 Nm Node and Beyond

Performance Investigation of Sram Cells Based on Gate-All-Around (gaa) Si Nanowire Transistor for Ultra-Low Voltage Applications

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Hybrid Integration of Gate-All-Around Stacked Si Nanosheet FET and Si/SiGe Super-Lattice FinFET to Optimize 6T-SRAM for N3 Node and Beyond

Projected performance of Si- and 2D-material-based SRAM circuits ranging from 16 nm to 1 nm technology nodes

Experimental investigation and design optimization guidelines of characteristic variability in silicon nanowire CMOS technology

Performance Analysis of 6T and 9T SRAM

Design and modelling of different SRAM's based on CNTFET 32nm technology

Impact of stochastic mismatch on FinFETs SRAM cell induced by process variation

A Novel Robust and Low-Leakage SRAM Cell with Nine Carbon Nanotube Transistors

Low-leakage 9-CN-MOSFET SRAM Cell with Enhanced Read and Write Voltage Margins

Novel 15T SRAM Cell for Low Voltage High Reliability Application

Self-heating Effect on Logic Performance of 6T-SRAM Based on CFET Device

Large-Scale Variability Characterization and Robust Design Techniques for Nanoscale SRAM

A Comprehensive Study of Nanosheet and Forksheet SRAM for Beyond N5 Node

Robust Monolithic 3D Carbon-Based Computing-in-SRAM with Variation-Aware Bit-Wise Data-Mapping for High-Performance and Integration Density

The Study and Test Method of SRAM Conventional Static Characteristics in 65 Nm Process Technology

Performance Analysis of 9T SRAM using 180nm, 90nm, 65nm, 32nm, 14nm CMOS Technologies

Low-power and robust ternary SRAM cell with improved noise margin in CNTFET technology