Abstract:The competition between charge recombination and extraction principally affects the fill factor (FF) and power conversion efficiency (PCE) of planar thin-film solar cells. In Sb2S3 thin-film solar cells, the electrocharge recombination and extraction n transport layer (ETL) plays a significant role in electron extraction and determination of Sb2S3 film absorber quality. Herein, a TiO2 ETL is strategically modified using an inorganic salt zinc halide (i.e., ZnCl2, ZnBr2, ZnI2), which simultaneously improves the electronic properties of TiO2 and promotes the growth of Sb2S3 films with larger grain size and higher crystallinity. The experimental results and theoretical calculations further reveal that the zinc halide can interact with TiO2 and simultaneously bond strongly with the upper Sb2S3 film, which creates a unique pathway for electron transfer, passivates the trap states, and alleviates the recombination losses effectively. As a result, an average PCE of 6.87 ± 0.11% and the highest PCE of 7.08% have been attained with an improved FF from 51.22 to 61.61% after ZnCl2 introduction. Additionally, introduction of ZnCl2 helps the unencapsulated devices to maintain 93% of their original performance after 2400 h of storage in a nitrogen-filled glovebox. This work develops an effective route for the optimization of ETLs and defect healing using simple and low-cost inorganic salts.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11550?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11550</a>.Device structure, modification process, and the morphology of the ETLs; XPS and UPS characterizations; dark J–V measurement of electron-only devices; side and top views of the most stable structures of zinc halide–TiO2; side and top views of isosurfaces for charge density differences; schematic diagram of ZnCl2 function between the TiO2 and Sb2S3; SEM-EDS mapping images of the ZnCl2–TiO2 film; conductivity measurements of different TiO2; SEM morphologies and XRD patterns of Sb2S3 films deposited on different substrates; EBSD map of the ZnCl2–TiO2-based Sb2S3 film; contact angles of Sb2S3 precursor solution on different TiO2; side and top views of the most stable structures of zinc halide–Sb2S3; photovoltaic characteristics of the Sb2S3 devices; electronic characteristics of the Sb2S3 devices; VOC dependence on light intensity; schematic band alignment between Sb2S3 and different ETLs; 1/C2 versus V curves; Nyquist plots of Sb2S3 devices; TPV decay characteristics; the stabilities of Sb2S3 devices stored in a nitrogen-filled glovebox at room temperature in the dark without any encapsulation (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11550/suppl_file/am0c11550_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synergistic effect through the introduction of inorganic zinc halide in the interface of TiO2 and Sb2S3 for high-performance Sb2S3 planar thin film solar cell.

Synergistic Effect Through The Introduction Of Inorganic Zinc Halides At The Interface Of Tio2 And Sb2s3 For High-Performance Sb2s3 Planar Thin-Film Solar Cells

Interface Modification with Inorganic Metal Salt for High Efficiency Perovskite Solar Cells

Synergistic Effect through the Introduction of Inorganic Zinc Halides at the Interface of TiO 2 and Sb 2 S 3 for High-Performance Sb 2 S 3 Planar Thin-Film Solar Cells

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Multidentate Anchoring Through Additive Engineering for Highly Efficient Sb2S3 Planar Thin Film Solar Cells

Surface Treatment Processed Electron Transport Layers for Efficient Sb2S3 Solar Cells

Post-Treatment of TiO2 Film Enables High-Quality Sb2Se3 Film Deposition for Solar Cell Applications.

High Open‐Circuit Voltage in Full‐Inorganic Sb2S3 Solar Cell Via Modified Zn‐Doped TiO2 Electron Transport Layer

Understanding the effect of TiCl4 treatment at TiO2/Sb2S3 interface on the enhanced performance of Sb2S3 solar cells

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells

Enhanced Hydrothermal Heterogeneous Deposition with Surfactant Additives for Efficient Sb2S3 Solar Cells

InCl3-modified SnO2 As an Electron Transporting Layer for Cd-free Antimony Selenide Solar Cells

Effective Additive for Enhancing the Performance of Sb2S3 Planar Thin Film Solar Cells

InCl3-modified SnO2 as Electron Transporting Layer for Cd-free Antimony Selenide solar cells

Quasiepitaxy Strategy for Efficient Full‐Inorganic Sb2S3 Solar Cells

Synergistic effects of ZnO compact layer and TiCl 4 post-treatment for dye-sensitized solar cells

Plasma Etching-Induced Surface Modification and Interfacial Defect Passivation for Antimony Triselenide Thin Film Solar Cells

Efficient CdS/Sb2S3 Interfacial Modification Using Sodium Borohydride Etching for Enhanced Performance of Low-Cost Full-Inorganic Antimony-Based Solar Cells

Heterojunction Interface Engineering of C60 Electron Transport Layer Insertion Enables Efficient Cd-Free Sb2se3 Solar Cells

n-Type Doping of Sb2S3 Light-Harvesting Films Enabling High-Efficiency Planar Heterojunction Solar Cells.