Abstract:Thermal annealing-induced enhancements of electrical conductivities at the temperature higher than the melting point of poly(ethylene-co-hexene) matrix for multiwalled carbon nanotubes filled poly(ethylene-co-hexene) (MWCNTs/PEH) composites were investigated by electrical conductivity measurements. Two types of MWCNTs with low and high aspect ratios (4 and 31) were added as fillers into PEH matrix, respectively for comparison study purpose. The morphological changes due to annealing for MWCNTs/PEH composites were observed by SEM. The formation of MWCNT networks in the composites were clearly demonstrated by rheological measurements. It is surprisingly found that the electrical conductivity for MWCNTs/PEH composites with high MWCNT concentrations increases obviously with annealing time of 40 min and the maximum increment approaches about 3 orders of magnitude with annealing time of 120 min. The increase of electrical conductivity of MWCNTs/PEH composites depends on MWCNT content, MWCNT aspect ratio and annealing time. SEM results clearly reveal that micrometer-sized MWCNT aggregates are broken down and more loosely packed MWCNT networks form due to annealing. Different types of networks in the composites are responsible for the evolutions of rheological (MWCNT network and PEH chain-MWCNT combined network) and electrical conductivity properties (tube-tube contacting MWCNT network). The reconstruction of MWCNT network during annealing is attributed to rotational diffusion of MWCNTs in PEH matrix at high temperature and the length of MWCNTs shows significant effect on this. The obvious enhancements of electrical conductivities can be ascribed to the thermal annealing-induced formation of loosely packed more homogeneous networks through non-Brownian motions.

Role of Multiwalled Carbon Nanotube on Mechanical Reinforcement of High-Density Polyethylene

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Extremely high reinforcement of high‐density polyethylene by low loading of unzipped multi‐wall carbon nanotubes

Influence of Wall Number and Surface Functionalization of Carbon Nanotubes on Their Antioxidant Behavior in High Density Polyethylene

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Preparation and Electrical Properties of Multiwalled Carbon Nanotubes Filled High-density Polyethylene Composites

Experimental Studies on Elastic Properties of High Density Polyethylene-Multi Walled Carbon Nanotube Nanocomposites

Investigation of the mechanical and thermal stability of ultra-high molecular weight polyethylene by using amide-multi-walled carbon nanotubes as a reinforcement material

High-speed Melt Stretching Produces Polyethylene Nanocomposite Film with Ultrahigh Mechanical Strength

Multi-walled carbon nanotube reinforcement in polypropylene nanocomposites: comprehensive analysis of thermal behavior, mechanical properties, and dispersion characteristics

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion

Thermal Annealing Induced Enhancements of Electrical Conductivities and Mechanism for Multiwalled Carbon Nanotubes Filled Poly(Ethylene-Co-Hexene) Composites

The effect of CNT grafting on the mechanical properties of the UHMWPE fiber/HDPE composite

A study of mechanical behavior and morphology of carbon nanotube reinforced UHMWPE/Nylon 6 hybrid polymer nanocomposite fiber

High density polyethylene hybrid nanocomposites reinforced with carbon nanofiber and nanoclay

Melt extrudate swell behavior of multi‐walled carbon nanotubes filled‐polypropylene composites

Mechanical Properties, Tribological Behavior, and Biocompatibility of High-Density Polyethylene/carbon Nanofibers Nanocomposites

Synergistic effect of Mn 2+ with unzipped carbon nanotubes on enhancement of mechanical properties of polyamide 66

Preparation and Performance of Carbon Nanotubes Reinforced Ultra-high Molecular Weight Polyethylene Fibre-based Composites

Synergetic effects of carbon nanotubes and carbon fibers on electrical and self-heating properties of high-density polyethylene composites