Abstract:The massive accumulation of plastic waste has caused a serious negative impact on the human living environment. Replacing traditional petroleum-based polymers with biobased and biodegradable poly(l-lactic acid) (PLLA) is considered an effective way to solve this problem. However, it is still a great challenge to manufacture PLLA-based composites with high thermal conductivity and excellent mechanical properties via tailoring the microstructures of the blend composites. In the present work, a melt extrusion-stretching method is utilized to fabricate biodegradable PLLA/poly(butylene adipate-co-butylene terephthalate)/carbon nanofiber (PLLA/PBAT/CNF) blend composites. It is found that the incorporation of the extensional flow field induces the formation of multioriented microstructures in the composites, including the oriented PLLA molecular chains, elongated PBAT dispersed phase, and oriented CNFs, which synergistically improve the thermal conductivity and mechanical properties of the blend composites. At a CNF content of 10 wt %, the in-plane thermal conductivity, tensile strength, and elongation at break of the blend composite reach 1.53 Wm–1 K–1, 66.8 MPa, and 56.5%, respectively, which increased by 31.9, 73.5, and 874.1% compared with those of the conventionally hot-compressed sample (1.16 Wm–1 K–1, 38.5 MPa, and 5.8%, respectively). The main mechanism for the improved thermal conductivity is that the multioriented structure promotes the formation of a CNF thermal conductive network in the composites. The strengthening mechanism is attributed to the orientation of both PLLA molecular chains and CNFs in the stretching direction, restricting the movement of PLLA molecular segments around CNFs, and the toughening mechanism is due to the transformation of PLLA molecular chains from low-energy gt conformers to high-energy gg conformers induced by extensional flow field. More interestingly, after the extrusion-stretched samples are annealed, the oriented PLLA molecular chains form oriented crystal structures such as extended-chain lamellae, common "Shish–kebabs," and hybrid Shish–kebabs, which further enhance the thermal conductivity and heat resistance of the samples. This work reveals the effects of the orientation of the matrix molecular chains and crystallites on the thermal conductivity and mechanical properties of composites and provides a new way to prepare high-performance PLLA-based composites with high thermal conductivity, excellent mechanical properties, and high heat resistance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.biomac.2c00067.DSC characterization, DMA characterization, rheological test characterization, FTIR characterization, and the relevant equations for calculating the crystallinity and thermal enhancement factor (PDF)This article has not yet been cited by other publications.

High-speed Melt Stretching Produces Polyethylene Nanocomposite Film with Ultrahigh Mechanical Strength

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Facile fabrication of ultrastrong polyethylene nanocomposite films with low filler content via flow-driven graphene re-dispersion assisted crystallization

Extremely high reinforcement of high‐density polyethylene by low loading of unzipped multi‐wall carbon nanotubes

Constructing highly oriented and condensed shish-kebab crystalline structure of HDPE/UHMWPE blends via intense stretching process:Achieving high mechanical properties and in-plane thermal conductivity

In Situ Synthesized Self-Reinforced HDPE/UHMWPE Composites with High Content of Less Entangled UHMWPE and High Gradient-Distributed Oriented Structures

Design of a ternary synergistic network of HDPE/BN/CNT composites with an aligned shish-kebab structure for enhanced thermal conductivity and tensile strength

Construction of flexible carbon nanotube film/PA66 composite with high dynamic mechanical properties

Fabrication of outstanding mechanical performance engineered poly (lactic acid)/thermoplastic poly(ester)urethane in-situ nanofiber composites with a large-scale industrial innovation methodology

Dramatic Enhancements In Toughness Of Polyimide Nanocomposite Via Long-Cnt-Induced Long-Range Creep

In-Situ Bubble Stretching Assisted Melt Extrusion for the Preparation of HDPE/UHMWPE/CF Composites

Rotational stress-induced shish-kebab governs the balance of enhanced thermal conductivity and mechanical performance of high-density polyethylene (HDPE) / boron nitride (BN) composites via axial hot compression

External flow-induced highly oriented and dense nanohybrid shish-kebabs: A strategy for achieving high performance in poly (lactic acid) composites

Mechanical, thermal, and dynamic compression of high-density polyethylene nanocomposites with graphene, montmorillonite, and calcium carbonate

Melt stretching and quenching produce low-crystalline biodegradable poly(lactic acid) filled with β-form shish for highly improved mechanical toughness

Synergetic effects of carbon nanotubes and carbon fibers on electrical and self-heating properties of high-density polyethylene composites

Flow‐field‐assisted Shaping of Linear Low‐density Polyethylene/low‐entanglement Ultra‐high Molecular Weight Polyethylene Blends with Enhanced Mechanical Properties and Thermal Conductivity

Fabricating High-Thermal-Conductivity, High-Strength, and High-Toughness Polylactic Acid-Based Blend Composites via Constructing Multioriented Microstructures

Towards high-performance all-polyethylene materials by a two-step processing strategy using two-roll mill

Mechanical Properties, Tribological Behavior, and Biocompatibility of High-Density Polyethylene/carbon Nanofibers Nanocomposites

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion