Abstract:In this study, tailored polyethylene reactor blends with the in situ embedding of a weakly entangled ultra-high-molecular weight polyethylene (UHMWPE) were synthesized by the polyhedral oligomeric silsesquioxane modified Ziegler-Natta (ZN) catalysts using a two-stage cascade polymerization technique. Holistic improvement of strength/stiffness/toughness was realized by the common injection modeling owing to the enhanced formation of an orientated structure which was verified by the patterns of two-dimensional (2D) small-angle X-ray scattering and 2D wide-angle X-ray diffraction, as well as the fracture morphology. 30 wt % of the less entangled UHMWPE was successfully incorporated into the high-density polyethylene (HDPE) matrix to achieve a synchronously increased tensile strength (52.4 MPa, +97.7%), Young's modulus (604.2 MPa, +43.6%), and impact resistance (74.4 kJ/m2, +675%), compared with those of the benchmarked HDPE. However, dissipation of a shish-kebab structure was pronounced in the depth direction of the HDPE spline reinforced with the disentangled UHMWPE. This dissipation was proved to partially sacrifice the strength and stiffness. Importantly, the impact strength is greatly enhanced (+140%) due to the cocrystallization effect of the disentangled linear UHMWPE chains with the HDPE matrix. The HDPE matrix reinforced with the weakly entangled UHMWPE presents wider gradient distribution and orientation degree distribution of oriented structures (including shish-kebab and stacked lamella) along the depth direction. Thus, the balance of strength/stiffness/toughness was synergistically improved with the wider gradient distribution of oriented structures. This in situ polymerization method with the weakly entangled UHMWPE offers a promising routine for achieving the high-performance polyethylene commodity.

Extremely high reinforcement of high‐density polyethylene by low loading of unzipped multi‐wall carbon nanotubes

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Diamond Nanothread As A New Reinforcement for Nanocomposites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Influence of Wall Number and Surface Functionalization of Carbon Nanotubes on Their Antioxidant Behavior in High Density Polyethylene

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Preparation and Electrical Properties of Multiwalled Carbon Nanotubes Filled High-density Polyethylene Composites

Synergistic effect of Mn 2+ with unzipped carbon nanotubes on enhancement of mechanical properties of polyamide 66

High-speed Melt Stretching Produces Polyethylene Nanocomposite Film with Ultrahigh Mechanical Strength

Investigation of the mechanical and thermal stability of ultra-high molecular weight polyethylene by using amide-multi-walled carbon nanotubes as a reinforcement material

Reinforcing High-Density Polyethylene by Polyacrylonitrile Fibers

Experimental Studies on Elastic Properties of High Density Polyethylene-Multi Walled Carbon Nanotube Nanocomposites

The effect of CNT grafting on the mechanical properties of the UHMWPE fiber/HDPE composite

Polymer chain conformations in hybrid composites of UHMWPE incorporated by GNP/MWCNT

Preparation and Performance of Carbon Nanotubes Reinforced Ultra-high Molecular Weight Polyethylene Fibre-based Composites

Synergetic effects of carbon nanotubes and carbon fibers on electrical and self-heating properties of high-density polyethylene composites

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion

In Situ Synthesized Self-Reinforced HDPE/UHMWPE Composites with High Content of Less Entangled UHMWPE and High Gradient-Distributed Oriented Structures

Matrix‐polymer‐functionalized Multiwalled Carbon Nanotubes As a Highly Efficient Toughening Agent for Matrix Polymers

Effects of Carbon Nanofibers on Crystalline Structures and Properties of Ultrahigh Molecular Weight Polyethylene Blend Fabricated Using Twin‐screw Extrusion

High density polyethylene hybrid nanocomposites reinforced with carbon nanofiber and nanoclay