Abstract:Effects of untreated and pretreated carbon nanofibers (CNFs) on the crystallization behavior, friction behavior, and mechanical properties of ultra high molecular weight polyethylene (UHMWPE)/high density polyethylene (HDPE) nanocomposites prepared by a twin-screw extrusion were studied. The differential scanning calorimetry and wide angle X-ray diffraction measurements indicated that the addition of CNFs impacted the temperature of crystallization, but had no significant effects on the crystalline structure of the UHMWPE/HDPE blend. The degree of crystallinity, and the tensile strength and modulus of the UHMWPE/HDPE systems exhibited an increasing trend initially with addition of CNFs, followed by a decrease at higher contents. With the increase of untreated CNF content, the friction coefficient of UHMWPE/HDPE was decreasing and displayed less change in the process of friction. The microstructure features on the fracture surfaces and friction surfaces of the polymer blend and the nanocomposites were analyzed in detail by scanning electron microscope observations. The degree of crystallinity of the nanocomposites with the pretreated CNFs exhibited a decrease due to the better interface adhesion compared to that in the nanocomposites with the same loading untreated CNFs. The enhancement in tensile strength of nanocomposites containing 0.5wt% treated CNFs was four times higher (32%) than that of the nanocomposites containing untreated CNFs (8%) over that of the pure polymer.

Preparation and Performance of Carbon Nanotubes Reinforced Ultra-high Molecular Weight Polyethylene Fibre-based Composites

Evaluation of Interfacial Properties of Atmospheric Pressure Plasma-Treated Cnt-Phenolic Composites by Dual Matrix Fragmentation and Acoustic Emission Tests

Influence of Wall Number and Surface Functionalization of Carbon Nanotubes on Their Antioxidant Behavior in High Density Polyethylene

The effect of CNT grafting on the mechanical properties of the UHMWPE fiber/HDPE composite

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Surface modification of multiwalled carbon nanotubes via gliding arc plasma for the reinforcement of polypropylene

Structure, Mechanical Properties and Friction Behavior of UHMWPE/HDPE/carbon Nanofibers

Preparing CNT/UHMWPE Composite and It’s Electrical Property Study

Investigation of the mechanical and thermal stability of ultra-high molecular weight polyethylene by using amide-multi-walled carbon nanotubes as a reinforcement material

Mechanical Properties of the Carbon Nanotube Modified Epoxy–Carbon Fiber Unidirectional Prepreg Laminates

Synergetic enhancement of interfacial properties and impact resistant of UHMWPE fiber reinforced composites by oxygen plasma modification

Extremely high reinforcement of high‐density polyethylene by low loading of unzipped multi‐wall carbon nanotubes

Freeze‐drying Method Prepared UHMWPE/CNTs Composites with Optimized Micromorphologies and Improved Tribological Performance

Effects of Carbon Nanofibers on Crystalline Structures and Properties of Ultrahigh Molecular Weight Polyethylene Blend Fabricated Using Twin‐screw Extrusion

Research Development of Preparation and Characterization of Polypropylene/Carbon Nano-tube Composites

Fabrication and characterization of microwave cured high-density polyethylene/carbon nanotube and polypropylene/carbon nanotube composites

Ultra-High Molecular Weight Polyethylene Fibers/Epoxy Composites: Effect of Fiber Treatment on Properties

Impact of plasma-modified pretreatment on the tensile properties of carbon fiber-reinforced epoxy composites

Preparation and characterization of polyurethane/multiwalled carbon nanotube composites

Influence of Oxygen/Argon/Nitrogen multi-component plasma modification on interlayer toughening of UHMWPE fiber reinforced composites

Preparation and Characterization of Novel Polyethylene/carbon Nanotubes Nanocomposites with Core–shell Structure