Effects of the Simultaneous Strengthening of the Glass Fiber Surface and Polyamide-6 Matrix by Plasma Treatment and Nanoclay Addition on the Mechanical Properties of Multiscale Hybrid Composites
Byeong-Joo Kim,Chang-Bin Oh,Ji Eun Lee,Man Young Lee
DOI: https://doi.org/10.3390/jcs7050176
2023-04-26
Journal of Composites Science
Abstract:To strengthen the mechanical properties of a fiber-reinforced plastic without deteriorating its toughness caused by adding nanomaterial, multiscale hybrid composites (MHC) composed of polyamide 6 (PA6), woven glass fibers (WGFs), nanoclay, and various additives were fabricated and characterized. A surfactant was used to improve the dispersion of the nanoclay in the composite, and a compatibilizer and toughening agent were added to enhance the interfacial interactions between the nanoclay and PA6 and the toughness of the MHC, respectively. In addition, the WGFs were pretreated with atmospheric-pressure air plasma to enhance the interfacial bonding between the WGF and the mixture composed of PA6/nanoclay/compatibilizer/toughening agent, which constitutes the matrix. The optimal composition of the PA6 mixture, optimal content of the nanoclay, and optimal conditions of the plasma pretreatment of the WGF surface were experimentally determined. A suitable manufacturing process was employed using a material composition that maximizes the mechanical properties of the MHC by mitigating the toughness deterioration owing to nanoclay addition. An appropriate quantity of the nanoclay increased the tensile properties as well as the elongation at the break of the MHC because the toughening agent prevented the reduction in the degree of elongation caused by increasing the clay content to a certain extent. Moreover, the plasma treatment of the WGF enhanced the flexural properties and impact resistance of the MHC. Therefore, not only the tensile strength, modulus, and elongation at the break of the PA6 nanocomposite, which constitutes the matrix of the MHC, increased up to 39.83, 40.91, and 194.26%, respectively, but also the flexural strength and modulus, absorbed impact energy, and penetration limit of the MHC increased by 20.2, 26.8, 83.7, and 100.0%, respectively.