Abstract:We present a solid‐state processing pathway for ultrahigh molecular weight polyethylene, a high‐end engineering polymer that cannot be melt processed. Ultra‐high molecular weight polyethylene (UHMWPE) stands out as the preferred material across a wide spectrum of demanding applications, thanks to its remarkable mechanical, chemical and physical attributes. Nevertheless, processing UHMWPE can be an arduous and time‐consuming endeavor. Traditional melt‐processing techniques, commonly employed for polymers, prove impractical due to the exceedingly high viscosity of the melt that follows from the highly entangled macromolecular chains. Several methods are known to lower the entanglement density of UHMWPE, such as crystallization from a semidilute solution or direct polymerization, resulting in a less interconnected polymer structure. Unfortunately, even with low‐entangled UHMWPE, melt processing remains unviable because of the rapid re‐entanglement of polymer chains upon melting. However, these low‐entangled UHMWPE materials can still be effectively processed in the solid state, a technique employed in the production of high‐performance UHMWPE fibers and tapes, currently the only two feasible geometries. This research reports the development of a solid‐state extrusion method for nascent low‐entangled powder, centering on manipulating the surface energy of the interior wall materials within the extruder and die. Ordinary steel dies proved ineffective for solid‐state extrusion, as they generated excessive friction between the die and UHMWPE, resulting in a rapidly escalating extrusion pressure. However, utilizing dies constructed from temperature‐resistant polymers allowed for extrusion at a consistent pressure without the need for lubricating agents. We demonstrate the practicality of the developed solid‐state extrusion method by fabricating UHMWPE monofilaments and tubes, showcasing its potential in expanding the range of producible UHMWPE geometries. Additionally, a first evaluation of the influence of processing conditions and the entanglement density of the reactor powder used on extrudability, and the properties of the resulting components is presented. Highlights A process for the solid‐state extrusion of UHMWPE is developed. UHMWPE processing with higher design flexibility than current industrial standards. UHMWPE processing with higher throughput than current industrial standards. Contrary to previous techniques no lubricating agent or co‐extrudate is used.

Towards high-performance all-polyethylene materials by a two-step processing strategy using two-roll mill

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Preparation of Polyethylene Elastomers with Increased High Molecular Weight and Nearly Perfect Strain Recovery by Steric Control of Asymmetric Α-Diimine Nickel Catalyst

In Situ Synthesized Self-Reinforced HDPE/UHMWPE Composites with High Content of Less Entangled UHMWPE and High Gradient-Distributed Oriented Structures

Ultra-high molecular weight polyethylene (UHMWPE)/high-density polyethylene (HDPE) blends with outstanding mechanical properties, wear resistance, and processability

Constructing highly oriented and condensed shish-kebab crystalline structure of HDPE/UHMWPE blends via intense stretching process:Achieving high mechanical properties and in-plane thermal conductivity

Flow‐field‐assisted Shaping of Linear Low‐density Polyethylene/low‐entanglement Ultra‐high Molecular Weight Polyethylene Blends with Enhanced Mechanical Properties and Thermal Conductivity

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Enhancing Chain Mobility of Ultrahigh Molecular Weight Polyethylene by Regulating Residence Time under a Consecutive Elongational Flow for Improved Processability

Solid‐state extrusion of nascent disentangled ultra‐high molecular weight polyethylene

Elongational Flow Field Processed Ultrahigh Molecular Weight Polyethylene/Polypropylene Blends with Distinct Interlayer Phase for Enhanced Tribological Properties

Dynamic rheological behavior, crystallization and friction performance of ultrahigh molecular weight polyethylene/polypropylene blends by multi-step melt processing strategy

Morphology evolution and mechanical property enhancement of linear low‐density polyethylene by adding disentangled ultrahigh molecular weight polyethylene

Study on Crystallization Kinetics of Partially Melting Polyethylene Aiming to Improve Mechanical Properties

High-speed Melt Stretching Produces Polyethylene Nanocomposite Film with Ultrahigh Mechanical Strength

Recent Advancements in the Synthesis of Ultra-High Molecular Weight Polyethylene via Late Transition Metal Catalysts

Facile fabrication of ultrastrong polyethylene nanocomposite films with low filler content via flow-driven graphene re-dispersion assisted crystallization

Ultrahigh Molecular Weight Polyethylene Lamellar‐Thin Framework on Square Meter Scale

Simultaneously enhancing strength and toughness for impact polypropylene copolymers by regulating the dispersed phase with high density polyethylene

Increasing the Resistance of HDPE to Abrasive Wear with Small Additions of UHMWPE

Extrusion Processing of Ultra-High Molecular Weight Polyethylene