Abstract:Understanding the thermal stability of ceramic matrix composites is one of the necessary prerequisites for their engineering application. This study aimed to investigate the stress response and failure mechanism of SiC-coated Cf composite during thermal shock in an O2 free environment, at temperature between 500 and 1800 degrees C. Composites with a single layer of SiC coating, and a reinforcing phase are carbon fiber yarns with a threedimensional four-step braided structure. A meso-scale finite element model considering the orientation of fiber yarns was established to analyze thermal residual stress (TRS) and thermal shock stress (TSS) by transient analysis. Results indicated that the most dangerous position generated by the TRS was in the matrix close to the fiber yarn/matrix interface. Initial cracks first nucleated in the matrix, because the matrix was subjected to large residual compressive stress along the braiding direction, which is related to the distribution characteristics of the fiber yarns (braiding method). Fiber yarns with different orientation exhibited almost the same stress state, and interaction between fiber yarns resulted in a similar "twisted" state. For single fiber yarns, the principal axis and fiber yarn/fiber yarn interface were prone to failure. TSS in the composites rapidly increased during the initial cooling stage. A sudden change in temperature and stress gradient led to cracking and peeling at the composites/ coating interface. Possible failure modes and mechanisms of the composites with and without the SiC coating are discussed.

Tensile and Stress‐Rupture Behavior of SiC/SiC Minicomposite Containing Chemically Vapor Deposited Zirconia Interphase

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

FEM Analysis of the Stress Response and Failure Mechanism of SiC-coated Cf/ SiC Composites During Thermal Shock

SiC/SiC mini-composites with multilayer ZrSiO4 interphase: Room-temperature properties and toughening mechanism

Damage Evolution and Fracture Behavior of C/SiC Minicomposites with Different Interphases under Uniaxial Tensile Load

In-situ Tensile Damage and Fracture Behavior of PIP SiC/SiC Minicomposites at Room Temperature

Preparation and tensile behavior of SiC<sub>f</sub>/SiC mini composites containing different types and thicknesses of interphase

Preparation and tensile behavior of SiCf/SiC mini composites containing different types and thicknesses of interphase

The fiber structure evolution and performance changes of SiC–ZrC fibers after 1600 °C heat treatment

Interfacial properties of SiCf/SiC minicomposites with a scheelite coating

Synthesis of Coatings on SiC Fibers and Their Effects on Microstructure and Mechanical Properties of SiCf/SiBCN Composites

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Effects of Zro2 Interphase on Mechanical and Microwave Absorbing Properties of Sicf/Sic Composites

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Fracture behavior of multlayer SiC/C composites

Microstructure And Fracture Behaviour Of Zro2 (2 Mol% Y2o3o) Reinforced With Sic Whiskers

Microstructure, Interfacial and Mechanical Properties of SiC Interphase Modified C/C-SiC Composites Prepared by Reactive Melt Infiltration

Microstructure and fracture behaviour of ZrO2 (2 mol% Y2O3) reinforced with SiC whiskers

Fracture Behavior of Sic/Sic Composites with Different Interfaces

Microstructure and High Temperature Strength of Sicw/Sic Composites by Chemical Vapor Infiltration

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating