Abstract:Functional gradient high-strength steel structures on the basis of a novel tailored spray quenching process can achieve an excellent crashworthiness and weight reduction, which own a promising future in advanced automotive and mechanical engineering. This paper focuses on the temperature distributions and mechanical properties characteristics of high strength 22MnB5 steel under complex spray jetting conditions. A spray density-based physical modeling method is simplified to describe the spray flow field and the water film evolution on the hot 22MnB5 surface during the spray quenching process. Fluid characteristics of spray jetting with single/twin nozzles and corresponding heat transfer intensity are systematically investigated by self-developed experimental scenarios. The results reveal that the fluid-solid heat transfer coefficient (IHTC) is dependent on the spray-quenching temperature distribution, which owns an intense correlation between post-quenched mechanical property and the jetting parameters involving the spray jetting pressure (SJP), the spray jetting height (SJH), the nozzle distance (ND), and initial quenching temperature (IQT). The average cooling rate under the single/twin nozzles jetting conditions can reached as 28.5–170.5 °C/s and 36.84–137.42 °C/s, corresponding to the peak IHTCs are 10.11–49.47 kW/(m2 K) and 9.69–44.76 kW/(m2 K), respectively. The hardness firstly increases and then decreases from the central point/zone to the edge along the radial direction after the spray quenching process. The largest radial hardness after the single/double nozzles spray quenching can be up to 50.21 % and 31.58 % larger than the lowest value, respectively. Moreover, the in-plane temperature field and corresponding post-quenched mechanical properties are further numerically predicted by introducing into the time-dependent IHTC and coupling with the CFD and Johnson-Mehl-Avrami (JMA) modeling. Finally, a validation work of U-type specimen was conducted to show the spray quenching technology owns a prospective future for gaining more complex-shaped parts with tailored mechanical properties.

Bottom Spray Quenching Device

Experimental Investigation of Spray Cooling Performance in Non‐boiling Zone on Rough Superhydrophilic/hydrophobic Surfaces

Research and Manufacture of Heavy Duty Horizontal Rotary Spray Quenching Equipment

Optimization design of structure of bottom spray quenching tank

Research and Application of Digital Timed Quenching Process and Equipment

Virtual Design of Integrated Bottom Head Quenching Scheme

Development and Application of Alternate Timed Quenching by Water and Air

On Selection of Quenching Media for Small-Sized Parts

The Equipment and Process for Quenching Treatment of Oil-well Pipes

Boiling and quenching heat transfer advancement by nanoscale surface modification

Enhancing mechanical properties and avoiding cracking by simulation of the quenching process of connecting rods

Enhancing Mechanical Properties and Avoiding Cracks by Simulation of Quenching Connecting Rods

Experimental and numerical investigation on temperature field and tailored mechanical properties distribution of 22MnB5 steel in spray quenching process

Investigation of quenching stress of 42CrMo treated by alternately timed quenching process

The Process Design of Water Quenching Based on Finite Element Simulation and Its Applications

Research on the Cooling Characteristic and Heat Transfer Coefficient of Dynamic Quenchant

Development And Application Of Multicycle Quenching-Partitioning-Tempering Process

Design of Ultrasonic Machining Device for Thin-Wall Cylinder of Air Compressor

Quenching process for 42 CrMo steel large diameter and long shaft

Development of Multi-Cycle Quenching–partitioning–tempering Process and Its Applications in Engineering

Status of quenching technology and standard research