Simulation on the spray cooling of a high-temperature cylindrical surface

Rui Zhang,Zhenlei Li,Jian Kang,Dong Chen,Guo Yuan,Fei Duan

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2024.125334

IF: 5.2

2024-06-01

International Journal of Heat and Mass Transfer

Abstract:In the hot-rolled seamless steel tube production process, quenching is a crucial process. Spray cooling technology can achieve uniform and high-intensity cooling during the steel tube production process, which is expected to improve production efficiency and product quality. This study performs numerical simulations to explore the effects of spray cooling on a heated cylindrical surface. The influence of spray angles is focused on the cooling efficiency, while the spray height is also found to be another crucial variable. In the simulation, the axial tilt angle and circumferential tilt angle vary between 0 ∼ 30°, and the spray height changes within 50 ∼ 150 mm. A high-temperature steel tube is selected as the test object. The detailed analysis is discussed on the variations in the cooling area and wall heat flux under different spray angles. The results indicate that the axial tilt angle can effectively solve the hot spot. With an increase in axial tilt angle and spray height, the cooling area expands gradually. Meanwhile, the wall heat flux decreases with an increasing axial tilt angle and spray height. However, when the spray height is too high (H > 100 mm), the excessive axial tilt angle will have a negative influence on the wetting region. Although the circumferential tilt angle greatly changes the shape of the cooling area, it has a smaller effect on the size. It is worth noting that the spray boundary is just tangent to the cylindrical surface at H = 70 mm. Only at this moment does the circumferential inclined spraying exhibit a positive influence on the wall heat flux.

engineering, mechanical,thermodynamics,mechanics