Abstract:Functional gradient high-strength steel structures on the basis of a novel tailored spray quenching process can achieve an excellent crashworthiness and weight reduction, which own a promising future in advanced automotive and mechanical engineering. This paper focuses on the temperature distributions and mechanical properties characteristics of high strength 22MnB5 steel under complex spray jetting conditions. A spray density-based physical modeling method is simplified to describe the spray flow field and the water film evolution on the hot 22MnB5 surface during the spray quenching process. Fluid characteristics of spray jetting with single/twin nozzles and corresponding heat transfer intensity are systematically investigated by self-developed experimental scenarios. The results reveal that the fluid-solid heat transfer coefficient (IHTC) is dependent on the spray-quenching temperature distribution, which owns an intense correlation between post-quenched mechanical property and the jetting parameters involving the spray jetting pressure (SJP), the spray jetting height (SJH), the nozzle distance (ND), and initial quenching temperature (IQT). The average cooling rate under the single/twin nozzles jetting conditions can reached as 28.5–170.5 °C/s and 36.84–137.42 °C/s, corresponding to the peak IHTCs are 10.11–49.47 kW/(m2 K) and 9.69–44.76 kW/(m2 K), respectively. The hardness firstly increases and then decreases from the central point/zone to the edge along the radial direction after the spray quenching process. The largest radial hardness after the single/double nozzles spray quenching can be up to 50.21 % and 31.58 % larger than the lowest value, respectively. Moreover, the in-plane temperature field and corresponding post-quenched mechanical properties are further numerically predicted by introducing into the time-dependent IHTC and coupling with the CFD and Johnson-Mehl-Avrami (JMA) modeling. Finally, a validation work of U-type specimen was conducted to show the spray quenching technology owns a prospective future for gaining more complex-shaped parts with tailored mechanical properties.

Optimization design of structure of bottom spray quenching tank

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Improvement of the flow rate distribution in quench tank by measurement and computer simulation

Virtual Design of Integrated Bottom Head Quenching Scheme

Numerical investigation on heat transfer enhancement of spray cooling by surface structure optimization

Experimental Study of the Effects of Structured Surface Geometry on Water Spray Cooling Performance in Non-Boiling Regime

Simulation on the spray cooling of a high-temperature cylindrical surface

Experimental and numerical investigation on temperature field and tailored mechanical properties distribution of 22MnB5 steel in spray quenching process

Bottom Spray Quenching Device

Air-Cooler Structure Optimization of HTGR Passive Cavity Cooling System

Optimum Design of Flow Distribution in Quenching Tank for Heat Treatment of A357 Aluminum Alloy Large Complicated Thin-Wall Workpieces by CFD Simulation and ANN Approach

Topology Optimization of Channel Cooling Structures Considering Thermomechanical Behavior

Prediction and Optimization of Water Flux Distribution for Flat Nozzles in Slab Continuous Casting

Research on topology optimization of liquid-cooled plates based on multi-level optimization

Experimental study on temperature drop during roller quenching process of large-section ultra-heavy steel plate

Performance Simulation and Structure Optimization for Fin -tube Heat Exchanger in Air Handle Unit

Calculation and Analysis of Heat Balance of Pit Quenching Oil Tank with Water-cooled Chamber

Research on the Cooling Characteristic and Heat Transfer Coefficient of Dynamic Quenchant

Numerical simulation of multi-array spray cooling for hot rolled seamless steel pipes

Optimization of air flow field for direct air cooling units

Optimization Design of Nozzle Structure Inside Boiler Based on Orthogonal Design