Abstract:This letter extends a new isolated bidirectional three‐phase buck‐boost power‐factor‐correction rectifier concept to medium‐voltage input, resulting in an solid‐state transformer (SST) that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single medium‐frequency transformer. The SST's primary side operates modular‐multilevel‐converter bridge legs in the quasi‐two‐level mode to minimize the cell capacitors, while the secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. High‐power applications with low‐voltage (LV) dc loads, for example, fast charging stations for electric vehicles (EVs), are typically supplied from the medium‐voltage (MV) grid. Aiming for low volume, MVac‐LVdc solid‐state transformers (SSTs) that provide galvanic separation with medium‐frequency transformers (MFTs) are thus considered, which are conventionally realized as two‐stage systems that consist of an ac‐dc power‐factor‐correction (PFC) rectifier and an isolated dc‐dc converter. This letter extends a new single‐stage isolated bidirectional PFC rectifier concept to MV levels, resulting in an SST that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single MFT. The SST's primary side operates modular‐multilevel‐converter (MMC) bridge legs, whose input voltages contain large ac components, in the quasi‐two‐level mode to minimize the cell capacitors. The secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐(DAB)‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. The concept is explained and validated using detailed circuit simulations of an exemplary 1‐MW system operating between a 10‐kV three‐phase grid and an 800‐V dc output. The component stresses are evaluated, and an efficiency of 98.1% and a power density of up to 0.6 kW/dm3 are estimated.

Innovative Matrix-Type AC-AC Solid-State Transformer Eliminating Ripple Power with Double-Grid Frequency

A Soft-Switching Solid-State Transformer Module

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

A Five-level AC/DC Converter for MV Solid-State Transformer

Study on Low-Frequency Ripple Voltage Suppression for Cascaded Three-Phase Solid-State-Transformer

DC Voltage Ripple Optimization of a Single-Stage Solid-State Transformer Based on the Modular Multilevel Matrix Converter

Design of A Medium Voltage Solid-State Transformer Based on Modular AC-AC Resonant Converter and an Input-Series-Output-Parallel Architecture

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

New single‐stage bidirectional three‐phase ac‐dc solid‐state transformer

Partial Fluctuation Power Control of Resonant Converter in Solid-State Transformer

The Matrix Hybrid Solid State Transformer: Leveraging Three Phase Systems for Enhanced Grid Capabilities

Bilateral Common-mode Voltage Injection Method with Minimized Low-frequency Ripple Buffering of AC/AC Solid-State Transformer

Back-to-Back H-Bridge Cell Based Modular Solid State Transformer with High-Frequency Link

500kva Hybrid Solid State Transformer (Hsst): Architecture, Functionality And Control

Research on Triple-Port SST Scheme Based on the Natural Elimination of MMC Sub-Modules Voltage Fluctuation and Imbalance

High-Efficiency Solid State Transformer Architecture For Large-Scale Pv Application

Common High-Frequency Bus Based Cascaded Multilevel Solid-State Transformer With Ripple and Unbalance Power Decoupling Channel

500Kva Hybrid Solid State Transformer (HSST): Design and Implementation of the SST

ANovel Single Stage AC-AC Converter for Hybrid Solid State Transformer (HSST)

Quasi-Two-Level Bridgeless PFC Rectifier for Cascaded Unidirectional Solid State Transformer