Abstract:This article develops a solid-state transformer (SST), which integrates PV panels and EV chargers together through the open-dc modular multilevel converter (MMC). Different from the well-known MMC, which has a common dc link, the discussed MMC is open-circuited at the dc link so that it should be analyzed from the three-phase viewpoint. The developed SST performs like two parallel-connected cascaded converters, and they are operated with opposite power flow directions. Compared with the conventional SST solution using two separate cascaded H-bridge (CHB) converters, the developed SST has relatively low component count so that it is expected to be of superiority in cost, footprint, and even power density. In addition, the usage of zero sequence voltage in the CHB converter can be replaced by circulating currents in the open-dc MMC so as to greatly reduce the risk of overmodulation. After the thorough power flow analysis on the open-dc MMC and the corresponding controller design, the developed SST is capable of freely working at any operating points with PV panels and EV chargers. Moreover, the developed SST takes the unbalanced grid conditions into account, which is another key contribution of this article. Finally, the balanced and unbalanced operations of the developed SST are both confirmed by the laboratory test results, and furthermore, the dynamic performance of the developed SST considering the time-variant characteristics of PV panels and EV chargers is also demonstrated through the PLECS simulation platform.

Research on Triple-Port SST Scheme Based on the Natural Elimination of MMC Sub-Modules Voltage Fluctuation and Imbalance

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

Common High-Frequency Bus Based Cascaded Multilevel Solid-State Transformer With Ripple and Unbalance Power Decoupling Channel

A Five-level AC/DC Converter for MV Solid-State Transformer

A Modular Multilevel Converter with Active Power Filter for Submodule Capacitor Voltage Ripples and Power Losses Reduction

A Modular Multilevel Converter Type Solid State Transformer with Internal Model Control Method

A Rotation-Based Capacitor-Voltage-balancing Method for Modular Multilevel Converters

Integration of PV Panels and EV Chargers on the Modular Multilevel Converter Based SST

A Hybrid Modular Multilevel Converter Topology with an Improved Nearest Level Modulation Method

An Inductive-Filtering Strategy of Submodule Ripple-Power in Triple-Port MMC-Based SST Applied to Hybrid Medium and Low Voltage AC/DC Interface

Study on Low-Frequency Ripple Voltage Suppression for Cascaded Three-Phase Solid-State-Transformer

Active Power Decoupling for a Modified Modular Multilevel Converter to Decrease Submodule Capacitor Voltage Ripples and Power Losses

A New Modular Multilevel Type Solid State Transformer with Internal Model Control Method

Research on Asymmetrical Operation of Multilevel Converter-Type Solid-State Transformers Based on High-Frequency Link Interconnection

Arm integrated double capacitor submodule for modular multilevel solid-state transformers with DC short-circuit fault ride-through capability

MMC Based Solid State Transformer for Large-Scale Distributed PV Integration and Medium Voltage AC/DC Interconnection

Optimization Scheme Based on High-Frequency Link Interconnection of Submodules

DC Voltage Ripple Optimization of a Single-Stage Solid-State Transformer Based on the Modular Multilevel Matrix Converter

MMC-SST Type Comprehensive Power Quality Management Method for the Medium-and High-voltage Distribution Network

Modeling and Operating Characteristic Analysis of Mmc-Sst Based Shipboard Power System