Abstract:This article develops a solid-state transformer (SST), which integrates PV panels and EV chargers together through the open-dc modular multilevel converter (MMC). Different from the well-known MMC, which has a common dc link, the discussed MMC is open-circuited at the dc link so that it should be analyzed from the three-phase viewpoint. The developed SST performs like two parallel-connected cascaded converters, and they are operated with opposite power flow directions. Compared with the conventional SST solution using two separate cascaded H-bridge (CHB) converters, the developed SST has relatively low component count so that it is expected to be of superiority in cost, footprint, and even power density. In addition, the usage of zero sequence voltage in the CHB converter can be replaced by circulating currents in the open-dc MMC so as to greatly reduce the risk of overmodulation. After the thorough power flow analysis on the open-dc MMC and the corresponding controller design, the developed SST is capable of freely working at any operating points with PV panels and EV chargers. Moreover, the developed SST takes the unbalanced grid conditions into account, which is another key contribution of this article. Finally, the balanced and unbalanced operations of the developed SST are both confirmed by the laboratory test results, and furthermore, the dynamic performance of the developed SST considering the time-variant characteristics of PV panels and EV chargers is also demonstrated through the PLECS simulation platform.

MMC Based Solid State Transformer for Large-Scale Distributed PV Integration and Medium Voltage AC/DC Interconnection

Integration of PV Panels and EV Chargers on the Modular Multilevel Converter Based SST

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

A Five-level AC/DC Converter for MV Solid-State Transformer

A Prototype of Modular Multilevel Converters

A Control System for Large-Scale Modular Multilevel Converters.

An MMC Based Hybrid Energy Storage System: Concept, Topology, and Control

A Modular Multilevel Converter with Boosting, Self-Balancing, and Scaling Capabilities for High- Voltage Transformerless PV Applications

Introduction, Modeling and Simulation of Modular Multilevel Converter

A Modular Multilevel Converter with Active Power Filter for Submodule Capacitor Voltage Ripples and Power Losses Reduction

A Modular Multilevel Converter Type Solid State Transformer with Internal Model Control Method

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

A Modular Multilevel Converter Submodule Based on Series-connected Power Devices for Medium Voltage Distribution Grid Applications

A New DC Microgrid Architecture Based on MMC-SST and Its Control Strategy

A New Modular Multilevel Type Solid State Transformer with Internal Model Control Method

A Hybrid Modular Multilevel Converter Topology with an Improved Nearest Level Modulation Method

MMC-SST Type Comprehensive Power Quality Management Method for the Medium-and High-voltage Distribution Network

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies