Abstract:This letter extends a new isolated bidirectional three‐phase buck‐boost power‐factor‐correction rectifier concept to medium‐voltage input, resulting in an solid‐state transformer (SST) that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single medium‐frequency transformer. The SST's primary side operates modular‐multilevel‐converter bridge legs in the quasi‐two‐level mode to minimize the cell capacitors, while the secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. High‐power applications with low‐voltage (LV) dc loads, for example, fast charging stations for electric vehicles (EVs), are typically supplied from the medium‐voltage (MV) grid. Aiming for low volume, MVac‐LVdc solid‐state transformers (SSTs) that provide galvanic separation with medium‐frequency transformers (MFTs) are thus considered, which are conventionally realized as two‐stage systems that consist of an ac‐dc power‐factor‐correction (PFC) rectifier and an isolated dc‐dc converter. This letter extends a new single‐stage isolated bidirectional PFC rectifier concept to MV levels, resulting in an SST that performs MVac‐LVdc conversion in a single converter stage and, unlike many modular SST concepts, employs only a single MFT. The SST's primary side operates modular‐multilevel‐converter (MMC) bridge legs, whose input voltages contain large ac components, in the quasi‐two‐level mode to minimize the cell capacitors. The secondary side employs a standard LV three‐phase rectifier, and a dual‐active‐bridge‐(DAB)‐like modulation strategy allows power flow regulation and ensures sinusoidal grid currents. The concept is explained and validated using detailed circuit simulations of an exemplary 1‐MW system operating between a 10‐kV three‐phase grid and an 800‐V dc output. The component stresses are evaluated, and an efficiency of 98.1% and a power density of up to 0.6 kW/dm3 are estimated.

Quasi-Two-Level Bridgeless PFC Rectifier for Cascaded Unidirectional Solid State Transformer

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

A Five-level AC/DC Converter for MV Solid-State Transformer

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

High Power Three-Level Rectifier Comprising SiC MOSFET & Si Diode Hybrid Power Stage

Neutral-Point Voltage Balancing Methods of Series-Half-Bridge LLC Converter for Solid State Transformer

Cascaded Half-Bridge Multilevel Inverter with Reduced Number of Power Switches

Totem-Pole Boost Bridgeless PFC Rectifier With Simple Zero-Current Detection and Full-Range ZVS Operating at the Boundary of DCM/CCM

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

Single Stage PFC Circuit with Full Bridge Structure

Common High-Frequency Bus Based Cascaded Multilevel Solid-State Transformer With Ripple and Unbalance Power Decoupling Channel

Single-Phase Bridgeless Three-Level Power Factor Correction Topologies Based on the Embedded Construction Scheme

Bridgeless Star Power Factor Correction Architecture

Partial Fluctuation Power Control of Resonant Converter in Solid-State Transformer

A ZCS AC/DC CONVERTER WITH HIGH POWER FACTOR BASED ON PWM CONTROL STRATEGY

Mirror-Bridge Phase-Shift Modulation With Low Common-Mode Noise for Single-Phase CHB PFC

New single‐stage bidirectional three‐phase ac‐dc solid‐state transformer

Study on Low-Frequency Ripple Voltage Suppression for Cascaded Three-Phase Solid-State-Transformer

A Novel Single Phase Three-Level Power Factor Correction with Passive Lossless Snubber

Interleaved Totem-Pole Bridgeless Pfc Rectifier with Zvs and Low Input Current Ripple