Abstract:Polyimide (PI), as an ideal interlayer dielectric material, is widely used in traditional communication fields. However, with the rapid development of 5G communication, conventional polyimide exhibits disadvantages such as signal delay and missing and is in urgent need of modification. Based on the beta -relaxation theory, we designed and prepared three types of triphenylenediamine-containing monomers with different side group sizes (A-AmM, A-AmP, and A-AmBP) and polymerized them with benzene tetracarboxylic dianhydride (PMDA) to obtain three types of polyimides (MPI, PPI, BPPI), to investigate the effect of the relaxation behavior on the dielectric constant (D k ) of the polyimide. It was also polymerized with 4,4 ' -(hexafluoroisopropyl)diphthalic anhydride (6FDA) to three fluorinated Polyimides (MFPI, PFPI, BFPPI) to investigate the effect of polar groups on D k and the dielectric loss (D f ). In addition, we also calculate the free volume of polyimide molecules under different side groups by materials studio simulation to further verify the effect of side groups on the D k . The results show that, firstly, with the increase of side group volume, polyimide still maintains excellent thermal stability, and its dielectric constant gradually decreases and mechanical strength gradually increases. Secondly, the dielectric constant of FPIs is significantly lower than that of the PIs due to the low polar group, and the thermal and mechanical properties are almost unchanged. In addition, benefiting from the combined effects of beta -relaxation and trifluoromethyl groups, BPFPI exhibits a low D k (2.64@10 GHz) and D f (0.0092@10 GHz), excellent thermal properties (glass transition temperature (T g ) = 282.3 degrees C, 5 % decomposition temperature (T d5% ) = 537 degrees C) and excellent mechanical properties (tensile modulus = 1.71 GPa, tensile strength = 134.7 MPa).

Intrinsic high- k –low-loss dielectric polyimides containing ortho -position aromatic nitrile moieties: reconsideration on Clausius–Mossotti equation

Polyimide Foams with Ultralow Dielectric Constants

Preparation and modeling of polyimide/ceramic composites with high dielectric constant

Intrinsic low dielectric constant polyimides: relationship between molecular structure and dielectric properties

Study on Syntheses and Properties of Some Novel Polyimides Containing Bisthiazole Rings

Preparation of fluorinated poly(benzoxazole-co-imide) with low dielectric constants based on the thermal rearrangement reaction of o-hydroxy polyimides

Preparation of Triphenylamine Polyimides with Low Dielectric Constants with Different Side Group Sizes Based on Β-Relaxation Theory

Low Dielectric Post-Cured Benzocyclobutene-Functionalized Fluorine-Containing Polyimide Material

Thermoplastic Polyimide with Low Dielectric Properties Enabled by the 2,2′-Spirobifluorene Group

Constructing Novel High Dielectric Constant Polyimides Containing Dipolar Pendant Groups with Enhanced Orientational Polarization

Temperature resistant amorphous polyimides with high intrinsic permittivity for electronic applications

Tröger’s Base (TB)-Based Polyimides as Promising Heat-Insulating and Low- K Dielectric Materials

Temperature-Resistant Intrinsic High Dielectric Constant Polyimides: More Flexibility of the Dipoles, Larger Permittivity of the Materials

Synthesis and characterization of fluorinated polyimides with high heat resistance and low dielectric constant

Frequency-dependent dielectric properties of aromatic polyimides in the 25–330 GHz range

D--A Strategy to boost dielectric breakdown strength of polyimide insulation

Reducing the Permittivity of Polyimides for Better Use in Communication Devices

High-Performance Intrinsic Low-K Polymer Via the Synergistic Effect of Its Three Units: Adamantyl, Perfluorocyclobutylidene and Benzocyclobutene

Data Science-Centric Design, Discovery, and Evaluation of Novel Synthetically Accessible Polyimides with Desired Dielectric Constant

Intrinsic-designed Polyimide Dielectric Materials with Large Energy Storage Density and Discharge Efficiency at Harsh Ultra-high Temperatures

A Facile Strategy for Intrinsic Low-Dk and Low-Df Polyimides Enabled by Spirobifluorene Groups