Abstract:High-precision microelectromechanical system (MEMS) accelerometers have wide application in the military and civil fields. The closed-loop microaccelerometer interface circuit with switched capacitor topology has a high signal-to-noise ratio, wide bandwidth, good linearity, and easy implementation in complementary metal oxide semiconductor (CMOS) process. Aiming at the urgent need for high-precision MEMS accelerometers in geophones, we carried out relevant research on high-performance closed-loop application specific integrated circuit (ASIC) chips. According to the characteristics of the performance parameters and output signal of MEMS accelerometers used in geophones, a high-precision closed-loop interface ASIC chip based on electrostatic time-multiplexing feedback technology and proportion integration differentiation (PID) feedback control technology was designed and implemented. The interface circuit consisted of a low-noise charge-sensitive amplifier (CSA), a sampling and holding circuit, and a PID feedback circuit. We analyzed and optimized the noise characteristics of the interface circuit and used a capacitance compensation array method to eliminate misalignment of the sensitive element. The correlated double sampling (CDS) technology was used to eliminate low-frequency noise and offset of the interface circuit. The layout design and engineering batch chip were fabricated by a standard 0.35 μm CMOS process. The active area of the chip was 3.2 mm × 3 mm. We tested the performance of the accelerometer system with the following conditions: power dissipation of 7.7 mW with a 5 V power supply and noise density less than 0.5 μg/Hz1/2. The accelerometers had a sensitivity of 1.2 V/g and an input range of ±1.2 g. The nonlinearity was 0.15%, and the bias instability was about 50 μg.

A Novel Time-Multiplexed Fully Differential Interface ASIC With Strong Nonlinear Suppression for MEMS Accelerometers

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

Digital Capacitance Measurement System Based on FPGA

One Method to Improve the Temperature Stability of Processing Circuit of Digital Accelerometer

A Low-Power Digital Processing Circuit for Capacitive Accelerometer

Research on High-Resolution Miniaturized MEMS Accelerometer Interface ASIC

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

A Low-Noise High-Linearity Interface ASIC for MEMS Gyroscopes

A fully-differential, multiplex-sensing interface circuit monolithically integrated with tri-axis pure oxide capacitive CMOS-MEMS accelerometers

A Closed-Loop Mems Accelerometer with Capacitive Sensing Interface Asic

An Interface ASIC for MEMS Vibratory Gyroscopes with Nonlinear Driving Control

A Novel Mash 2-1 Sigma-Delta A/D Converter with High-To-Low Conversion for Closed-Loop Mems Accelerometer Interface

Design of Interface ASIC for Capacitive Seismic Sensor with Harmonic Distortion Self-Testing

An Interface ASIC Design of MEMS Gyroscope with Analog Closed Loop Driving

Online Demodulation of Miniatured Capacitive Angular Position Sensor based on ASIC Implementation

A Pseudo-Differential Capacitive MEMS Accelerometer Analog Front-End Design

A Digital Interface ASIC for Triple-Axis MEMS Vibratory Gyroscopes

A low-noise SC-type interface asic for a closed-loop MEMS gyroscope

Elimination of nonlinearity in sigma delta MEMS accelerometer

A Highly Linear FPGA-Based TDC and a Low-Power Multichannel Readout ASIC with a Shared SAR ADC for SiPM Detectors