Abstract:In laser-induced breakdown spectroscopy (LIBS), ablation takes place in general in an ambient gas of the atmospheric pressure, often in air but also in noble gas such as argon or helium. The use of noble gas is known to significantly improve the performance of the technique. We investigate in this work the morphology and the characteristics of induced plasma in argon and in air. The purpose is to understand the mechanism of the analytical performance improvement by the use of argon ambient with respective to air ambient and the dependence on the other experimental parameters such as the laser fluence. The observation of plasma morphology in different ambient gases provides also information for better design of the detection system which optimizes the signal collection according to the used ambient gases. More specifically, the expansion of the plasma induced on an aluminum target with nanosecond infrared (1064nm) laser pulse in two ambient gases, argon and the atmospheric air, has been studied with spectroscopic imaging at short delays and with emission spectroscopy at longer delays. With relatively low ablation laser fluence (65J/cm2), similar morphologies have been observed in argon and in air over the early stage of plasma expansion, while diagnostics at longer delay shows stronger emission, higher electron density and temperature for plasma induced in argon. With higher ablation laser fluence (160J/cm2) however, different expansion behaviors have been observed, with a stagnating aluminum vapor near the target surface in air while a propagating plume away from the target in argon. The craters left on the target surface show as well corresponding difference: in air, the crater is very shallow with a target surface chaotically affected by the laser pulse, indicating an effective re-deposition of the ablated material back to the crater; while in Ar a deeper crater is observed, indicating an efficient mass removal by laser ablation. At longer delays, a brighter, denser and hotter plasma is always observed in argon than in air as with lower ablation laser fluences. The observed different influences of the ambient gas on the plasma expansion behavior for different laser fluences are related to the different modes of laser-supported absorption waves, namely laser-supported combustion (LSC) wave and laser-supported detonation (LSD) wave.

Impact of target-derived and ambient oxygen on gas-phase oxidation in laser ablation plumes

The Interaction of Ambient Background Gas with a Plume Formed in Pulsed Laser Deposition

Oxidation-Induced Surface Roughening of Aluminum Nanoparticles Formed in an Ablation Plume.

Temporal and Spatial Dynamics of Laser-Induced Aluminum Plasma in Argon Background at Atmospheric Pressure: Interplay with the Ambient Gas

Spectroscopic Characterization of Laser-Ablated Plume from A La-Ca-Mn-O Target in an O-2 Ambient

Morphology and Characteristics of Laser-Induced Aluminum Plasma in Argon and in Air: A Comparative Study

Convoluted Effect of Laser Fluence and Pulse Duration on the Property of a Nanosecond Laser-Induced Plasma into an Argon Ambient Gas at the Atmospheric Pressure

Spatiotemporal characterization of cerium monoxide in laser ablation plasmas using spectrally-resolved fast-gated imaging

Optical diagnostics and mass spectrometry on the afterglow of an atmospheric pressure Ar/O$_2$ radiofrequency plasma used for polymer surface treatment

Effect of Additive Oxygen on the Interaction of a Helium Atmospheric Pressure Plasma Jet with a Dielectric Surface

Experimental Study of Laser-Induced Plasma: Influence of Laser Fluence and Pulse Duration

Ultraviolet Versus Infrared: Effects of Ablation Laser Wavelength on the Expansion of Laser-Induced Plasma into One-Atmosphere Argon Gas

An Optical Emission Spectroscopic Study on Visible Laser Ablation of Ta2O5 in Ambient O2

Planar Laser-Induced Fluorescence Diagnostics for Spatiotemporal OH Evolution in Pulsed Corona Discharge

Understanding plume splitting of laser ablated plasma: A view from ion distribution dynamics

Effect of Oxygen As Additive on an Atmospheric Nanosecond Pulsed Helium Plasma Jet Impinging on a Dielectric Surface

The formation of atomic oxygen and hydrogen in atmospheric pressure plasmas containing humidity: picosecond two-photon absorption laser induced fluorescence and numerical simulations

Experimental Determination of the Temperature Range of Alo Molecular Emission in Laser-Induced Aluminum Plasma in Air

Laser-induced plasma-ignited hydrogen jet combustion in engine-relevant conditions

Fluid phenomena of laser-induced Al plasma in ambient gas

Fast Photograph and OES Study on Dynamics of IR Laser Produced Metal Plasma in Air