Abstract:O-17 MAS NMR and XRD studies of precursor-derived Y1.6Zr0.4Ti2O7.2 and Y1.2Zr0.8Ti2O7.4 have been performed to investigate the development of local and long-range order in these materials as they evolve from a metastable amorphous state upon heating. Zirconium titanate (ZrTiO4) was also investigated to help interpret the O-17 NMR spectra of the ternary compositions. Consistent with earlier studies, crystallization was observed at 800 degrees C to form a fluorite structure and a small amount of rutile; weak broad reflections were also observed which were ascribed to the presence of small pyrochlore-like ordered domains or particles within the fluorite phase. As the temperature was increased further, the sizes of these domains grew along with the concentration of rutile. At the highest temperature studied (1300 degrees C), the reflections of the thermodynamic phases, pyrochlore and zirconium titanate (ZrTiO4), dominated the XRD pattern. The O-17 NMR spectra revealed a series of different peaks that were assigned to different 3- and 4-coordinate O local environments. The data were consistent with the formation of a metastable phase Y2-xZrxTi2-yZryO7+x with pyrochlore-like ordering but with Zr substitution on both cation sites of the pyrochlore structure. At low temperatures, doping on the A (Y3+) sites predominates (i.e., x >= y), consistent with the fact that the pyrochlore develops out of a more disordered fluorite-like, phase. As the temperature is raised, the Zr doping on the A site decreases and the metastable phase at this temperature can now be written as Y2-x ' Zrx ' Ti2-y ' ZryO7+x ' (i.e., x ' < y '); TiO2 is also observed, consistent with this suggestion. At high temperatures, doping on the B site decreases and the resonances due to the stoichiometric pyrochlore yttrium titanate (Y2Ti2O7) dominate the NMR spectra. Weaker O-17 NMR resonances due zirconium titanate (ZrTiO4) are also observed. (c) 2007 Elsevier Inc. All rights reserved.

Development of a novel Ba2YZrO5F refractory: Synthesis, Stability study and Interaction with pure Ti

Performance of BaZrO3/Y2O3 dual-phase refractory applied to TiAl alloy melting

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Preparation of Sr2CeZrO6 Refractory and Its Interaction with TiAl Alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Properties of various CaO-Al2O3-TiO2 refractories and their reaction behaviours in contact with Ti6Al4V melts

Improved thermal properties and CMAS corrosion resistance of high-entropy RE zirconates by tuning fluorite-pyrochlore structure

Thermochemical compatibility between La2(Ce1-xZrx)2O7 and 4 mol% Y2O3 stabilized zirconia after high temperature heat treatment

Effect of BaTiO3 addition on structures and mechanical properties of 3Y-TZP ceramics

Effect of Ti on microstructure and mechanical properties of Al0.8Nb0.5TixV2Zr0.5 refractory complex concentrated alloys

Oxalate-precursor processing for high quality BaZrO3

Preparation and application evaluation of La2O3-doped Y2O3 crucible materials for melting TiAl alloys

A novel potential ceramic material for melting Ti6Al4V alloy: A solid solution of BaZrO3 and CaZrO3

Enhancement of the temperature stabilities in yttrium doped (Ba 0.99Ca 0.01)(Ti 0.98Zr 0.02)O 3 ceramics

Study on the formation mechanism of Y-Ti-O oxides during mechanical milling and annealing treatment

Effect of lattice defects on thermal conductivity of Ti-doped, Y 2O3-stabilized ZrO2

Effect of Zr4+ content on crystal structure, micromorphology, ferroelectric and dielectric properties of Ba(ZrxTi1−x)O3 ceramics

Enhanced Sintering Resistance in LaYbZr2O7 System Through HfO2 Doping for Thermal Insulation Ceramic Materials

Synthesis, microstructure and dielectric properties of zirconium doped barium strontium titanate obtained by solvothermal method

17O NMR Studies of Local Structure and Phase Evolution for Materials in the Y2Ti2O7–ZrTiO4 Binary System

The Effect of Zr on the Microstructure of Ba(Ti1−yZry)O3 Thin Films Prepared by Chemical-Solution Deposition