Abstract:Yttrium-stabilized zirconia (YSZ) materials are routinely used as thermal barrier coatings (TBCs). The phase composition and microstructure of YSZ materials significantly influence their properties. In this study, ZrO2 ceramics composed respectively of monoclinic ZrO2 (m-ZrO2), tetragonal YSZ (t-YSZ) and cubic YSZ (c-YSZ) phases were sintered. The effect mechanism of phase composition and microstructure on thermophysical and mechanical properties were investigated by experiment together and numerical calculation. The result indicates that YSZ materials with c-YSZ phase are more suitable as TBC materials in terms of heat insulation, thermal expansion match with the metal substrate, and strain tolerance. The YSZ ceramic with c-YSZ phase also exhibits lower thermal conductivity than those composed of the t-YSZ and m-ZrO2 phases due to its greater lattice distortion, number of oxygen vacancies, and lower sound velocity as a result of greater Y2O3 doping. Bond lengths and cohesive energy calculations based on first principles reveal that the reason that the Y2O3 doping causes the CTE values of ZrO2 to increase is due to the bonding between ions becoming weaker, and the c-YSZ phase exhibits the highest CTE value. First-principles calculations also indicate that the c-YSZ phase exhibits a lower elastic modulus and better malleability and plasticity than m-ZrO2 and t-YSZ phases. However, the t-YSZ phase has better fracture toughness due to toughening under stress and finer grains.

Effect of lattice defects on thermal conductivity of Ti-doped, Y 2O3-stabilized ZrO2

Effect of Lattice Distortion and Disordering on the Mechanical Properties of Titania‐Doped Yttria‐Stabilized Zirconia

Low Thermal Conductivity of SnO2‐Doped Y2O3‐Stabilized ZrO2: Effect of the Lattice Tetragonal Distortion

Influence of doping elements on thermo-physical properties of co-doped strontium zirconate for potential thermal barrier coatings

Study of microstructure, electronic structure and thermal properties of Al2O3-doped tetragonal YSZ coatings

Thermophysical and mechanical properties of cubic, tetragonal and monoclinic ZrO2

Low Thermal Conductivity Without Oxygen Vacancies in Equimolar YO1.5 + TaO2.5- and YbO1.5 + TaO2.5-stabilized Tetragonal Zirconia Ceramics

Thermo-mechanical properties of ThO 2 -doped Y 2 O 3 stabilized ZrO 2 for thermal barrier coatings

Effects of YSZ Additions on Thermoelectric Properties of Nb-Doped Strontium Titanate

Effect of doping location induced anisotropy on thermophysical properties of dilute Fe 2 O 3 ‐Y 2 O 3 ‐ZrO 2 solid solutions

Effect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics

Tailoring the thermal conductivity of Sc2O3–Yb2O3 Co-stabilized ZrO2 thermal barrier materials and mechanism insight

Effect Of Bismuth Oxide On The Microstructure And Electrical Conductivity Of Yttria Stabilized Zirconia

Thermal Conductivity of Ytterbia-Stabilized Zirconia

Effect of La2O3 on Microstructure and Thermal Conductivity of La2O3-Doped YSZ Coatings

Conductivity of Y2O3 and Yb2O3 co-doped zirconia materials in the intermediate and low temperature range

Phase Composition and Stability, Sintering and Thermal Conductivity of Gd2O3 and Yb2O3 Co-Doped YSZ

Oxygen‐vacancy‐mediated microstructure and thermophysical properties in Zr 3 Ln 4 O 12 for high‐temperature applications

Effect of MgO Doping on the Thermal Conductivity of Sm2Zr2O7

Molecular dynamics simulation of Sc2O3-Gd2O3-Y2O3 dopant effect on the crystal structure and thermophysical properties of zirconia-based ceramic materials

Influence of various additions of Ti4+ substitution Ce4+ on high-temperature phase stability of co-precipitation Ti4+and Ce4+ co-doping YSZ powders