Abstract:This study aimed to enhance the sinterability and conductivity of yttria fully stabilized zirconia electrolyte through co-doping by 2 mol% of ZnO and different contents of MnO 2 (0, 0.5, 1, 1.5 mol%) at two sintering temperatures of 1300 and 1400 °C. Phase composition identification, density, microstructure, and conductivity of the samples were evaluated using X-ray diffraction (XRD), Archimedes' method, field emission scanning electron microscopy (FESEM), and electrochemical impedance spectroscopy (EIS), respectively. The XRD results revealed that ZnO and MnO 2 are successfully doped in the fluorite structure of YSZ sintered at 1400 °C, and the cubic structure is completely preserved. However, at a sintering temperature of 1300 °C, the (111) peaks of doped samples were slightly split, which implied a slight phase transformation of YSZ from cubic to a tetragonal structure. The co-doped samples, at both sintering temperatures, showed higher relative density and grain size compared with pure YSZ. The addition of 2 mol% of ZnO and 0.5 mol% of MnO 2 at 1400 °C increased the relative density of YSZ from 81.6% to 95.1%. The increase in relative density and grain size, while maintaining the cubic structure, caused an increase in the conductivity of the mentioned sample. Compared with pure YSZ, the sample's total conductivity increased from 7.37 to 10.03 S m −1 at 800 °C. The proposed composition showed better sintering behavior, lower activation energy of grain conductivity, and higher conductivity than pure YSZ. This behavior is thought to be due to the facilitating rearrangement of atoms during sintering and an increase in oxygen ion vacancy concentration due to co-doping with the appropriate amount of ZnO and MnO 2 .

Effect of MgO Doping on the Thermal Conductivity of Sm2Zr2O7

Thermal Expansion and Defect Chemistry of MgO-Doped Sm2Zr2O7.

Influence of Magnesia Doping on Structure and Electrical Conductivity of Pyrochlore Type Gdsmzr2o7

Thermal expansion coefficients of Sm2Zr2O7 doped with MgO

Bivalent Ions Doping in Rare-Earth Zirconate Sm_2Zr_2O_7

Effect of Point Defects on the Thermal Conductivity of Sc2O3-Y2O3 Co-Stabilized Tetragonal ZrO2 Ceramic Materials

Molecular dynamics simulation of Sc2O3-Gd2O3-Y2O3 dopant effect on the crystal structure and thermophysical properties of zirconia-based ceramic materials

Thermal Expansion Coefficients of Sm<sub>2</sub>Zr<sub>2</sub>O<sub>7</sub> Doped with MgO

The influence of ZrO2 doping on microstructure and electrical properties of ZnO-based conductive ceramics

Impact of nonstoichiometry on the mechanical properties and thermal conductivity of gadolinium zirconate ceramics

Effect of CaO addition on the structure and electrical conductivity of the pyrochlore-type GdSmZr2O7

Sintering and Electrical Conductivity of the GdSmZr2O7 Ceramic with and Without ZnO Sintering Aid

Enhancing sintering behavior and conductivity of YSZ electrolyte by co-doping of ZnO and MnO 2

Effect of doping rare earth oxides (RE= Sc, Y, Gd, Eu) on structural, thermal and mechanical properties of La2(Zr0.7Ce0.3)2O7 ceramics

Effect of lattice defects on thermal conductivity of Ti-doped, Y 2O3-stabilized ZrO2

Investigating the mechanism of infrared emissivity control in MgO doped YSZ based ceramics

Thermal Expansion and Thermal Conductivity of SmxZr1−xO2−x/2 (0.1 ≤ X ≤ 0.5) Ceramics

Effect of Rare Earth Elements on Stability and Sintering Resistance of Tetragonal Zirconia for Advanced Thermal Barrier Coatings

Influence of ytterbium- and samarium-oxides codoping on structure and thermal conductivity of zirconate ceramics

Influence of doping elements on thermo-physical properties of co-doped strontium zirconate for potential thermal barrier coatings

Effect of MgO addition on sintering temperature, crystal structure, dielectric and ferroelectric properties of lead-free BZT ceramics