Abstract:The addition of alkali elements has become mandatory for boosting solar cell performance in chalcogenide thin films based on kesterites (Cu2ZnSnS4, CZTS). A novel doping process is presented here, that consists in the incorporation of sodium or lithium during the deposition of the CdS buffer layer, followed by a Post-Deposition Annealing (PDA). As the doping route leads to more efficient devices in comparison with the undoped reference sample, the influence of PDA temperature was also investigated. Compositional profiling techniques (TOF-SIMS and GDOES) revealed a dependence of the alkaline distribution in kesterites with the PDA temperature. Although the doping process is effective in that it increases the alkaline concentration compared to the undoped sample, the compositional profiles indicate that a significant proportion of Li and Na remains "trapped" within the CdS layer. In the 200-300 oC range the alkali profiles registered the higher concentration inside the kesterite. Despite this, an additional alkali accumulation close to the Mo/FTO substrate was found for all the samples, which is frequently related to alkali segregation at interfaces. The addition of both, lithium and sodium, improves the photovoltaic response compared to the undoped reference device. This is mainly explained by a substantial improvement in the open-circuit potential (Voc) of the cells, with best devices achieving efficiencies of 4.5% and 3% for lithium and sodium, respectively. SEM images depicted a "bilayer structure" with larger grains at the top and small grains at the bottom in all samples. Moreover, the calculated bandgap energies of the CZTS films account for changes in the crystallographic order-disorder of the kesterites, more related to the PDA treatment rather than alkali incorporation. Even if further optimization of the absorber synthesis and doping process will be required, this investigation allowed the evaluation of a novel strategy for alkali incorporation in kesterite based solar cells.

Effect of sodium doping on crystal growth and band matching of the heterojunction in flexible CZTS solar cells

Effect of Na doping on the performance and the band alignment of CZTS/CdS thin film solar cell

Passivation of Grain Boundaries and Defects in CZTSSe Solar Cells by In Situ Na Doping

Efficient and bending durable flexible Cu2ZnSn(S,Se)4 solar cells achieved by Ga doping stress regulation

The Multiple Roles of Na Ions in Highly Efficient CZTSSe Solar Cells

Defect Passivation in Cu2ZnSnSe4 Thin-Film Solar Cells by Novel Sodium Doping

Crystallization mechanism and defect passivation of Cu2ZnSn(S,Se)4 thin film solar cells via in situ potassium doping

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

Sb Doping Strategy to Promote Growth and Suppress Defects in Solution-Processed CZTSSe Solar Cells for Improved Optoelectronic Performance

CdS(In)/CZTSSe bandgap alignment engineering for performance enhancement of solar cells without ZnO layer

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells

Facile synthesis of Cu2ZnSnS4 nanocrystals and its use for dye-sensitized solar cells applications

Effect of TiN diffusion barrier layer on residual stress and carrier transport in flexible CZTSSe solar cells

High-performance sub-micron CIGSSe solar cells optimized for sodium doping by adjusting diffusion barriers

Optimizing the properties of Cu2ZnSn(S,Se)4 solar cells via cationic substitution with trace Ca

Solution-Processed One-Dimensional ZnO@CdS Heterojunction toward Efficient Cu2ZnSnS4 Solar Cell with Inverted Structure

Realizing zinc-doping of CdS buffer layer via partial electrolyte treatment to improve the efficiency of Cu2ZnSnS4 solar cells

Influence of Cd0.6Zn0.4S buffer layer on the band alignment and the performance of CZTS thin film solar cells

Promoting solution-processed CdTe nanocrystal solar cells by rationally controlled copper doping

A new approach for alkali incorporation in Cu2ZnSnS4 solar cells