Abstract:The resurgence of electromobility drives the need for high energy density cathode materials. LiNiO 2 (LNO) meets this demand, based on its high specific capacity in a narrow voltage range and without relying on scare elements. Yet, it has been plagued by various issues, such as poor cycling performance and thermal instability. Adding dopants, such as widely available Mg 2+ , is a common strategy to balance cycling performance and energy density. Most prior studies focused on large Mg content ranges and were based on laboratory X-ray diffraction. Hence, the influence of Mg 2+ addition on the crystal structure remains ambiguous, especially when small amounts are used (≤ 5 mol%; particularly interesting for industrial applications). Here, we present a systematic study of LiNi 1− y Mg y O 2 (0 ≤ y ≤ 0.05) investigated by high-resolution synchrotron-based X-ray diffraction combined with elemental analysis, electron microscopy and electrochemical testing. The synthetic route relies on the addition of 10 nm Mg(OH) 2 nanoparticles prior to the final calcination, as well as on co-precipitation. It is found that Mg 2+ mostly occupies the Ni site until saturating at ∼1.7%, then the Li site becomes preferred. This trend in the site occupancies influences the lattice parameters, oxygen coordinate within the unit cell and Ni–O bond distances. Doping also modifies the electrochemical behavior as a cathode material, stabilizing the capacity retention during cycling but sacrificing specific discharge capacity. Laboratory-based operando X-ray diffraction reveals that the increase in capacity retention is due to the suppression of the H2-H3 phase transition and interlayer distance collapse already in 3% Mg-doped LNO. The combination of structural and electrochemical characterization of doped LNO provides useful insights into the structural chemistry of the Mg 2+ dopant and can serve as a starting point to understand Mg as a component in multiple dopant strategies for cathode material design and application.

Structural, electrochemical, and Li-ion diffusion properties of Mg&Mn dual doped LiNiO2 cathode materials for Li-ion batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

Relieving capacity decay and voltage fading of Li1.2Ni0.13Co0.13Mn0.54O2 by Mg2+ and PO43- dual doping

Tracing Low Amounts of Mg in the Doped Cathode Active Material LiNiO 2

An Mg–Al dual doping strategy to enhance the structural stability and long cycle life of LiNi0.8Co0.1Mn0.1O2 cathode material

Submicron single-crystalline LiNi0.5Mn1.5O4 cathode with modulated Mn3+ content enabling high capacity and fast lithium-ion kinetics

Structural and electrochemical properties of Mg-doped nickel based cathode materials LiNi0.6Co0.2Mn0.2−xMgxO2 for lithium ion batteries

Heterogeneous doping-induced surface reconstruction toward high-performance LiNiO2 cathode materials for lithium-ion batteries

Stabilization of Li 2 MnO 3 phase by Mg doping suppressing irreversible oxygen loss and Mn ions migration

Stabilizing the High-Voltage Cycle Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material by Mg Doping

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Tuning Li 2 MO 3 Phase Abundance and Suppressing Migration of Transition Metal Ions to Improve the Overall Performance of Li- and Mn-rich Layered Oxide Cathode

Preparation and Characterization of Li1.167-K Mn0.583Ni0·25O2 (x=0, 0.025, 0.05 and 0.075) As Cathode Materials for Highly Reversible Lithium-Ion Batteries

Improvement of the cyclic deterioration and structural evolution of Li[Li0.2Ni0.2Mn0.6]O2 cathode material by controlling initial charging voltages

Electrochemical Kinetics And Performance Of Layered Composite Cathode Material Li[Li0.2ni0.2mn0.6]O-2

Progress, Challenge, and Prospect of LiMnO2: An Adventure toward High‐Energy and Low‐Cost Li‐Ion Batteries

Modification study of Mg/W-doped LiNi0.9Mn0.1O2 layered oxide cathode materials for lithium-ion batteries

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries

Overlithiation-driven structural regulation of lithium nickel manganese oxide for high-performance battery cathode

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries