Abstract:The resurgence of electromobility drives the need for high energy density cathode materials. LiNiO 2 (LNO) meets this demand, based on its high specific capacity in a narrow voltage range and without relying on scare elements. Yet, it has been plagued by various issues, such as poor cycling performance and thermal instability. Adding dopants, such as widely available Mg 2+ , is a common strategy to balance cycling performance and energy density. Most prior studies focused on large Mg content ranges and were based on laboratory X-ray diffraction. Hence, the influence of Mg 2+ addition on the crystal structure remains ambiguous, especially when small amounts are used (≤ 5 mol%; particularly interesting for industrial applications). Here, we present a systematic study of LiNi 1− y Mg y O 2 (0 ≤ y ≤ 0.05) investigated by high-resolution synchrotron-based X-ray diffraction combined with elemental analysis, electron microscopy and electrochemical testing. The synthetic route relies on the addition of 10 nm Mg(OH) 2 nanoparticles prior to the final calcination, as well as on co-precipitation. It is found that Mg 2+ mostly occupies the Ni site until saturating at ∼1.7%, then the Li site becomes preferred. This trend in the site occupancies influences the lattice parameters, oxygen coordinate within the unit cell and Ni–O bond distances. Doping also modifies the electrochemical behavior as a cathode material, stabilizing the capacity retention during cycling but sacrificing specific discharge capacity. Laboratory-based operando X-ray diffraction reveals that the increase in capacity retention is due to the suppression of the H2-H3 phase transition and interlayer distance collapse already in 3% Mg-doped LNO. The combination of structural and electrochemical characterization of doped LNO provides useful insights into the structural chemistry of the Mg 2+ dopant and can serve as a starting point to understand Mg as a component in multiple dopant strategies for cathode material design and application.

Heterogeneous doping-induced surface reconstruction toward high-performance LiNiO2 cathode materials for lithium-ion batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries

Role of Al-doping with Different Sites Upon the Structure and Electrochemical Performance of Spherical LiNi0.5Mn1.5O4 Cathode Materials for Lithium-Ion Batteries

Ti‐Gradient Doping to Stabilize Layered Surface Structure for High Performance High‐Ni Oxide Cathode of Li‐Ion Battery

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Unveiling the role of Ni doping in the electrochemical performance improvement of the LiMn2O4 cathodes

Facile and scalable dry surface doping technique to enhance the electrochemical performance of LiNi(0.64)Mn(0.2)Co(0.16)O(2)cathode materials

Surface Reconstruction of High-Voltage LiNi0.5Mn1.5O4 Cathode via the Sculpture Method toward Enhanced Stability

Tracing Low Amounts of Mg in the Doped Cathode Active Material LiNiO 2

Mg2+ Doped LiNi1/3Co1/3Mn1/3O2 Hollow Flake-Like Structures with Enhanced Performances Cathodes for Lithium-Ion Batteries

Improving the Electrochemical Performances and Structural Stability of Ultrahigh-Ni Cathodes by Using Multi-Element Co-Doping Methods

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries

High-rate Performance of LiNi0.5Mn1.45Al0.05O4 Cathode Material for Lithium-Ion Batteries

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials