Abstract:Monte Carlo based GEANT4 simulations have been carried out to estimate the efficiency (<math>η</math>) of thermal neutron detection with boric acid (H3BO3) as a converter material. Different geometries of detector configurations — planar stack, sphere, cylinder and cuboid were considered and their efficiency were computed for relevant geometric parameters along with different 10B enrichment (<math>BE</math>) levels content in boric acid, with Low Level Discriminator (LLD) value fixed at 300 keV. The planar stack configuration detector was designed by replicating two dimensional detector units (DUs) – each consisting of boric acid as a converter material and Silicon (Si) as a detector material – in the third dimension. The simulation carried out for varied layer thicknesses (<math>0.25μm</math> to <math>10μm</math>) of boric acid showed that efficiency (<math>η</math>) increased with increasing thickness, reached a maximum at a critical thickness (<math>tsc</math>) and thereafter found to decrease. Typically, at a critical thickness of <math>∼</math>3.5<math>μm</math>, the <math>η</math> for 100% <math>BE</math> content in boric acid was found to be 15.96% for 30 DUs. For the case of sphere, cylinder and cuboid of boric acid embedded in Si, the simulations were performed for diameter and width both varying from <math>0.5μm</math> to <math>9.5μm</math> in steps of <math>0.5μm</math>. In particular for cylinder and cuboid geometries, the depth was also varied from <math>25μm</math> to <math>275μm</math> with a step size of <math>25μm</math>. In all these configurations <math>η</math> was found to increase initially and was maximum at a critical diameter and width of <math>∼</math>8–9<math>μm</math>, and thereafter it was found to reduce. Apart from the simulated <math>η</math> estimation, histogram plots depicting the energy deposited in Si detector region by the generated charged particles (7Li <math>=</math> 0.839 MeV and <math>α=1.47MeV</math>) upon thermal neutron interaction in boric acid have also been studied for various geometrical parameters such as thickness, diameter and width of detector.

Application of thin boron deposit by electrophoresis as neutron detectors

Boron-10 layers, Neutron Reflectometry and Thermal Neutron Gaseous Detectors

Development of a novel neutron detection technique by using a boron layer coating a Charge Coupled Device

Realization and Evaluation of the Boron Nano Particle-based Drip-Coating Method for Boron-Lined Gaseous Neutron Detectors

Research of boron lined honey-neutron detector realized with atomic layer deposition

Neutron autoradiography with nuclear tracks detectors: an imaging technique for Boron Neutron Capture Therapy

Hybrid Superconducting Neutron Detectors

Efficiency of Boric acid coated semiconductor neutron detector - A GEANT4 simulation study

Investigation of gamma-ray sensitivity of neutron detectors based on thin converter films

A proposed boron-carbide-based solid-state neutron detector

Study of boron-lined straw-tube detector array for neutron scattering measurement

Neutron detection using boron gallium nitride semiconductor material

Method for stabilizing the detection efficiency of grazing angle incidence boron-lined neutron detectors

Development of an innovative external (in air) Particle Induced Gamma-ray Emission method for rapid non-destructive determination of isotopic composition of boron in "As received" boron based ceramic neutron absorbers

Natural Boron and 10B-Enriched Hexagonal Boron Nitride for High-Sensitivity Self-Biased Metal-Semiconductor-Metal Neutron Detectors

Thickness-dependent neutron detection efficiency of LiF-Si-based active neutron detector for boron neutron capture therapy

The Research Of High Detection Efficiency Boron Lined Detector With A Honeycomb Neutron Converter

The performance of a high-resistance semiconductor detector based on h- BN with thermal neutron detection capability

Superheated Droplets Detector For Thermal Neutron Detection

Realization of a Thin Boron Layer Neutron Beam Monitor

Boric acid as converter material for semiconductor neutron detector- A GEANT4 simulation study