Optoelectronic and Dielectric Properties of Tenorite CuO Thin Films Sprayed at Various Molar Concentrations

Ouarda Ben Messaoud,Abdelouahab Ouahab,Saâd Rahmane,Souheila Hettal,Aicha Kater,Moustefa Sayad,Hafida Attouche,Noureddine Gherraf
DOI: https://doi.org/10.3311/ppch.22136
2024-03-14
Periodica Polytechnica Chemical Engineering
Abstract:The work in hand presents the elaboration of CuO thin films using a home-made spray pyrolysis technique at room atmosphere. The films were synthesized on preheated glass substrate at 450 °C. The source solution molarity was varied from 0.025 to 0.1 mol/L. The films were characterized by employing X-Ray Diffraction technique, UV-Vis-NIR spectrophotometry, Scanning Electron Microscope imagery, Energy Dispersive Spectroscopy, and four-points probe techniques. The X-ray diffraction analysis confirmed that all films are polycrystalline with a preferred orientation along the plane (−111) of the monoclinic crystal structure phase of tenorite (CuO). The SEM images showed a homogeneous and smooth surface. Crystallinity and grain size were improved. The rise of solution concentration induced a reduction of transmittance and reflectance in the visible region. The energy gap, the absorption coefficient, the extinction coefficient, refractive index, dielectric constant ( ԑ r and ԑ i ) and loss energy were estimated from transmittance and reflectance data. The gap energy decreases from 2.72 to 2.56 eV. The film deposited for 0.025 mol/L exhibits the highest real part of the dielectric constant ( ԑ r ~ 17). The film resistivity which is in order of 10 2 Ω cm decreases with the increase of molar concentration. The estimated dielectric constant indicated that the resulting CuO thin films could be used as dielectric layers for optoelectronic devices working in Vis-NIR region of radiation. Furthermore, the relatively high band gap, high absorption coefficient and high conductivity of the film obtained at 0.075 mol/L, make them good candidates as absorption layers in solar cells applications.
engineering, chemical
What problem does this paper attempt to address?