Abstract:Ion-selective electrodes (ISE’s) have benefits for solution-phase detection and quantification of ions, such as ease of operation, low cost, and high throughput compared to, e.g., ion chromatography or mass spectrometry methods. ISE devices are traditionally operated under zero-current conditions, where analyte ions passively exchange across a selective membrane barrier, yielding a Nernstian response after equilibration of Coulombic and chemical driving forces across the membrane. However, this passive mode of operation can require long equilibration times and lead to drift, for example due to electrolyte leakage and pH impacting the membrane and reference electrode. In recent years, non-equilibrium detection techniques have been of growing interest, where the ISE signal is obtained under applied electrical signal. However, the majority of this work has been devoted to cation sensing, with relatively few studies examining anion ISEs under active electrical actuation. Agricultural expansion and the corresponding uptick in application of supplemental nitrogen to soil has led to an increased demand for technologies to measure anions like nitrate – both from a production and regulation standpoint. In this work, we employ galvanostatic polarization of solid-contact ISEs as a non-equilibrium nitrate detection method. Our investigation involves coating electrodes with a redox-active charged polymer to act as a transduction layer to convert ionic to electronic signal, followed by solvent casting of a polymeric ion-selective membrane. We examine the impact of repeated rapid charging and discharging ISE electrode stacks on measurement time and stability. We compare the metrics derived from this technique to conventional open-circuit measurements using the same device. We identify benefits for this mode of operation using established nitrate membrane materials (e.g. nitrate ionophore VI membrane cocktail) that address some of the typical limitations of these conventional materials and we discuss opportunities for further refinement.

Regulating the Polypyrrole Ion-Selective Membrane and Au Solid Contact Layer to Improve the Performance of Nitrate All-Solid Ion-Selective Electrodes

An all-solid-state NO3- ion-selective electrode with gold nanoparticles solid contact layer and molecularly imprinted polymer membrane.

Preparation of Nitrate Bilayer Membrane Ion-Selective Electrode Modified by Pericarpium Granati-Derived Biochar and Its Application in Practical Samples

Preparation/Property Relationships for a Nitrate Amperometric Sensor: Effect of Nanowires Polymerization Parameters

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

Improvement of Amperometric Sensor Used for Determination of Nitrate with Polypyrrole Nanowires Modified Electrode

An All-Solid-State Nitrate Ion-Selective Electrode with Nanohybrids Composite Films for In-Situ Soil Nutrient Monitoring

Solid-Phase Extraction and Amperometric Determination of Nitrite with Polypyrrole Nanowire Modified Electrodes

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold II: Urea Based Tripodal Ionophores for Polymeric Membrane Nitrate Selective Electrodes

An amperometric nitrate sensor based on well-aligned cone-shaped polypyrrole-nanorods

Stable Ion-Selective Electrode Based on Screen Printed Electrode for the Pb 2+ Detection Using Hierarchical Polypyrrole-Cupct Nanowires As the Solid Contact

Non-Equilibrium Nitrate Detection in Ionophore-Based Solid-Contact Ion-Selective Electrodes

Feasibility Study of an All-solid-state ISE Using Quaternary Ammonium Compounds for Soil Nitrate-nitrogen Fast Determination

Preparation of PPy Nanowires and Its Amperometric Response to Nitrate

Improving the Stability of Pb2+ Ion-Selective Electrodes by Using 3D Polyaniline Nanowire Arrays As the Inner Solid-Contact Transducer

Selective separation of monovalent anions by PPy/pTS membrane electrodes in redox transistor electrodialysis

Electrocatalytic Reduction of Nitrate at Polypyrrole Modified Electrode

Amperometric Sensing of Nitrite Using a Glassy Carbon Electrode Modified with a Multilayer Consisting of Carboxylated Nanocrystalline Cellulose and Poly(diallyldimethyl Ammonium) Ions in a PEDOT Host

Preparation of Ni/PPy Nanowires Modified Electrode and Its Electrocatalytic Activity to Nitrate

Electrochemical property study of polyoxometalates acid-polypyrrole nanopaticles glass carbon electrode modified with a macroporous anodic alumina membrane

Study of Nitric Oxide Sensors Based on Nafion/Phosphotungstic Heteropolyacid/Polypyrrole Modified Glassy Carbon Electrodes