Abstract:Ion-selective electrodes (ISE’s) have benefits for solution-phase detection and quantification of ions, such as ease of operation, low cost, and high throughput compared to, e.g., ion chromatography or mass spectrometry methods. ISE devices are traditionally operated under zero-current conditions, where analyte ions passively exchange across a selective membrane barrier, yielding a Nernstian response after equilibration of Coulombic and chemical driving forces across the membrane. However, this passive mode of operation can require long equilibration times and lead to drift, for example due to electrolyte leakage and pH impacting the membrane and reference electrode. In recent years, non-equilibrium detection techniques have been of growing interest, where the ISE signal is obtained under applied electrical signal. However, the majority of this work has been devoted to cation sensing, with relatively few studies examining anion ISEs under active electrical actuation. Agricultural expansion and the corresponding uptick in application of supplemental nitrogen to soil has led to an increased demand for technologies to measure anions like nitrate – both from a production and regulation standpoint. In this work, we employ galvanostatic polarization of solid-contact ISEs as a non-equilibrium nitrate detection method. Our investigation involves coating electrodes with a redox-active charged polymer to act as a transduction layer to convert ionic to electronic signal, followed by solvent casting of a polymeric ion-selective membrane. We examine the impact of repeated rapid charging and discharging ISE electrode stacks on measurement time and stability. We compare the metrics derived from this technique to conventional open-circuit measurements using the same device. We identify benefits for this mode of operation using established nitrate membrane materials (e.g. nitrate ionophore VI membrane cocktail) that address some of the typical limitations of these conventional materials and we discuss opportunities for further refinement.

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold II: Urea Based Tripodal Ionophores for Polymeric Membrane Nitrate Selective Electrodes

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold I: PN-heterocycles and Urea Based Cleft Ionophores for Hydrosulfide/hydrosulfate Selective Electrodes

Hydrogen Bond-Based Macrocyclic And Tripodal Neutral Ionophores For Highly Selective Polymeric Membrane Sulfate-Selective Electrodes

The Fabrication of All Solid-State Ammonium Ion Selective Electrodes Used in Aquaculture

Regulating the Polypyrrole Ion-Selective Membrane and Au Solid Contact Layer to Improve the Performance of Nitrate All-Solid Ion-Selective Electrodes

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

Highly Selective Potentiometric Sensing of Biologically Relevant Pyrophosphate and Lysophosphatidic Acid Using N-Alkyl/Aryl Ammonium Resorcinarenes/Extended-Resorcinarenes As Ionophores

Preparation of Nitrate Bilayer Membrane Ion-Selective Electrode Modified by Pericarpium Granati-Derived Biochar and Its Application in Practical Samples

Intramolecularly Hydrogen-Bonded Cavity Containing Macrocyclic/acyclic Aromatic Pyridone Foldarands As Modularly Tunable Ionophores for Selective Potentiometric Sensing of Metal Ions

Polymeric Membrane Electrodes Using Calix[4]pyrrole Bis/Tetra-Phosphonate Cavitands As Ionophores for Potentiometric Acetylcholine Sensing with High Selectivity.

Direct Potentiometric Bicarbonate/carbon Dioxide Sensing Based on Polymeric Membranes Doped with Selective Meso-Bisubstituted Calix[4]pyrrole Ionophores.

Characterization and Calibration of Sulphate ISE with Complex Membrane as Ionophore

Nonequilibrium Anion Detection in Solid-Contact Ion-Selective Electrodes

Non-Equilibrium Nitrate Detection in Ionophore-Based Solid-Contact Ion-Selective Electrodes

Squaramide-based tripodal ionophores for potentiometric sulfate-selective sensors with high selectivity.

Designing new sulfate ionophores for potentiometric membrane sensors: Selectivity assessment and practical application

Polymeric Membrane Fluoride-Selective Electrodes Using Lewis Acidic Organo-Antimony(V) Compounds As Ionophores

Trihexyltetradecylphosphonium Chloride Based Ratiometric Fluorescent Nanosensors for Multiplex Anion Discrimination

Polymer–multiwall Carbon Nantubes Composites for Durable All Solid-Contact H2PO4−-selective Electrodes

Study of Ion-to-Electron Transducing Layers for the Detection of Nitrate Ions Using FPSX(TDDAN)-Based Ion-Sensitive Electrodes

Selective electrodialysis: Targeting nitrate over chloride using PVDF-based AEMs