Abstract:Uncertainty in the figure of merit (FOM) parameters is a central feature of the best-estimate plus uncertainty (BEPU) method, which provides insight into the analysis margins not available from other analysis methods. The FOM uncertainty distributions are formed from propagation of the variations and uncertainty distributions in the operational and modeling parameters used in simulations of a design-basis accident (DBA) scenario for a nuclear power plant. To compute an accurate FOM uncertainty distribution, it is critical to accurately quantify and account for the input parameter prediction uncertainties. The coolant flow rate through fuel channels, or more precisely, the hydraulic resistance, including the impact of two-phase flow and its distribution in the primary heat transport system and the critical heat flux (CHF) of the fuel, are two key parameters for the limiting postulated accident scenarios in a CANDU reactor for various DBAs. Prediction uncertainty distributions for these parameters can be derived by directly validating code predictions against in-reactor measurements of flow rate and experimental measurements of CHF, respectively. Such code validation circumvents the convoluted and complex approach of decomposing computer models of physical phenomena into microscopic parameters, such as interfacial mass, momentum, and heat transfer correlations, and propagation of their uncertainty distributions to obtain an overall parameter uncertainty distribution of interest. Uncertainties associated with predictions of the coolant flow rate and CHF arise due to temporal and spatial variations and uncertainties in reactor conditions, limitations of physical models and their implementation in the codes, and in the case of CHF, measurement uncertainties associated with full-scale experiments. Careful assessment of key uncertainties, specifically their magnitudes, is important for ensuring uncertainty magnitudes are not unnecessarily over- or underestimated. These uncertainties also need to be characterized properly, e.g., whether uncertainties are common to a group of reactor fuel channels or vary independently for each fuel channel. Inadequate identification or incorrect classification or characterization of uncertainties would result in an inaccurate FOM uncertainty distribution. One important focus area for this study is the distinction between apparent prediction uncertainty (the difference between code prediction and measurement) and actual prediction uncertainty (the difference between code prediction and the true value). The actual code prediction uncertainty can be calculated from the apparent code uncertainty, provided there is adequate knowledge about the measurement uncertainty. The uncertainty models developed using this approach will be used as part of the BEPU analysis for slow loss-of–reactor power regulation accidents.

Fusion Power Plant Cost Modeling Uncertainties

Concept Design of Fusion Power Shutdown System for ITER

Optimizing the cost of the STEP programme

Toward a First-Principles Integrated Simulation of Tokamak Edge Plasmas

Safety: a proportionate approach in an uncertain application

Potential Early Markets for Fusion Energy

CURRENT STATUS, CHALLENGES AND PROSPECTS OF CONTROLLED NUCLEAR FUSION: THE ECONOMICS

3D high-fidelity automated neutronics guided optimization of fusion blanket designs

Sources of Cost Overrun in Nuclear Power Plant Construction Call for a New Approach to Engineering Design

An integrated model for materials in a fusion power plant: transmutation, gas production, and helium embrittlement under neutron irradiation

Concept design overview: a question of choices and compromise

Conceptual design workflow for the STEP Prototype Powerplant

Comparison analysis of 1D/2D/3D neutronics modeling for a fusion reactor

Derivation of Uncertainty Distributions for Channel Flow Rate and Fuel Critical Heat Flux Predictions for Best-Estimate Plus Uncertainty Analysis of Slow Loss-of–Reactor Power Regulation Accidents in CANDU Stations

Mechanical Model for a Full Fusion Tokamak Enabled by Supercomputing

Re-examining the Role of Nuclear Fusion in a Renewables-Based Energy Mix

Maturing the design: challenges in maturing a first of a kind fusion power plant

The value of fusion energy to a decarbonized United States electric grid

Analysis of Power Conversion System Options for ARC-like Tokamak Fusion Reactor Balance of Plant

The interplay of the innovation cycle, build time, lifetime and deployment rate of new energy technologies. A case study of nuclear fusion energy

Challenging Fuel Cycle Modeling Assumptions: Facility and Time Step Discretization Effects