Abstract:An integrated plasma profile control strategy, ARTAEMIS, is being developed for extrapolating present-day advanced tokamak (AT) scenarios to steady-state operation. The approach is based on semi-empirical modelling and was initially explored on JET (Moreau et al 2008 Nucl. Fusion 48 106001). This paper deals with the general applicability of this strategy for simultaneous magnetic and kinetic control on various tokamaks. The determination of the device-specific, control-oriented models that are needed to compute optimal controller matrices for a given operation scenario is discussed. The methodology is generic and can be applied to any device, with different sets of heating and current drive actuators, controlled variables and profiles. The system identification algorithms take advantage of the large ratio between the magnetic and thermal diffusion time scales and have been recently applied to both JT-60U and DIII-D data. On JT-60U, an existing series of high bootstrap current (∼70%), 0.9 MA non-inductive AT discharges was used. The actuators consisted of four groups of neutral beam injectors aimed at perpendicular injection (on-axis and off-axis), and co-current tangential injection (also on-axis and off-axis). On DIII-D, dedicated system identification experiments were carried out in the loop voltage (V ext) control mode (as opposed to current control) to avoid feedback in the response data from the primary circuit. The reference plasma state was that of a 0.9 MA AT scenario which had been optimized to combine non-inductive current fractions near unity with 3.5 < βN < 3.9, bootstrap current fractions larger than 65% and H 98(y,2) = 1.5. Actuators other than V ext were co-current, counter-current and balanced neutral beam injection, and electron cyclotron current drive. Power and loop voltage modulations resulted in dynamic variations of the plasma current between 0.7 and 1.2 MA. It is concluded that the response of essential plasma parameter profiles to specific actuators of a given device can be satisfactorily identified from a small set of experiments. This provides, for control purposes, a readily available alternative to first-principles plasma modelling.

Mechanical Model for a Full Fusion Tokamak Enabled by Supercomputing

Toward a First-Principles Integrated Simulation of Tokamak Edge Plasmas

Plasma Models for Real-Time Control of Advanced Tokamak Scenarios

The Role of Advanced Modeling in the Assembly and Operation of Tokamak Magnets

Validation and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane

Improved Tokamak Concept Focusing On Easy Maintenance

GATM: A 3-D FE Fusion Magnet Model and Application to DIII-D and Next-generation Devices

Maintenance Oriented Tokamak Reactor With Low Activation Material And High Aspect Ratio Configuration

Structural considerations for a Tokamak fusion reactor

Combing physics-based and data-driven predictions for quantitatively accurate models that extrapolate well; with application to DIII-D, AUG, and ITER tokamak fusion reactors

Multiscale computational study to predict the irradiation-induced change in engineering properties of fusion reactor materials

Flexible, integrated modeling of tokamak stability, transport, equilibrium, and pedestal physics

MAST Upgrade - Construction Status

ITER full model in MCNP for radiation safety demonstration

Understanding Large-Scale Plasma Simulation Challenges for Fusion Energy on Supercomputers

Training and Upgrading Tokamak Power Plants with Remountable Superconducting Magnets

Verification of the Finite Element Model of the Magnet System of the Globus-M2 Spherical Tokamak Based on the Experimental Data

Finite element models for radiation effects in nuclear fusion applications

MCNP Models for Tokamak Cooling Water System Equipment Evaluations

Tokamak edge-SOL turbulence in H-mode conditions simulated with a global, electromagnetic, transcollisional drift-fluid model