Abstract:China Fusion Engineering Test Reactor (CFETR) is a superconducting tokamak proposed by national integration design group for magnetic confinement fusion reactor of China to bridge the R&D gaps between ITER and DEMO. Since the launch of CFETR conceptual design, a modular helium cooled lithium ceramic blanket concept had been under development by the blanket integration design team of the Institute of Plasma Physics of the Chinese Academy of Sciences, to complete CFETR in demonstrating its fusion energy production ability, tritium self-sufficiency and the remote maintenance strategy. To validate the feasibility, the neutronic analyses for CFETR with this modular helium cooled lithium ceramic blanket were performed. The 1-D neutronic study for CFETR was done in the first place to give a preliminary and quick demonstration of the overall neutronic performance. Meanwhile, the neutronic analyses for a single standard helium cooled lithium ceramic blanket module were done in several times to give more insight for the material and geometry parameters of intra-module structures. Therefore, the principles for neutronic design and the module level optimized parameters were produced, based on which the design of practical blanket modules planted in tokamak vacuum vessel was completed. In the end, the 3-D neutronic analysis for CFETR was done utilizing the MCNP code, in which the 11.25 degree sector model (consist of blanket modules, manifold, support plate, shield, divertor, vacuum vessel, thermal shield and TF coils) was generated with the McCad automated conversion tool from the reference CAD model for analysis, the bi-dimensional (radial and poloidal) neutron source map was plugged via general source definition card to stimulate the D-T fusion neutrons. The concerned neutronics parameters of CFETR, mainly including the tritium breeding ratio to characterize tritium self-sufficiency, the energy multiplication factor to characterize power generation, as well as, the inboard mid-plane radial profiles of neutron flux densities, helium production rate, displacement damage rate and the energy deposition to characterize the shielding performance, were produced. In principle, the neutronics performance of CFETR with modular helium cooled lithium ceramic blanket is promising. The tritium breeding capability meets the design target and, by referring to that for ITER and the EU DEMO fusion power plant, the inboard mid-plane shielding is effective to fulfill the radiation design requirement of the superconducting TF-coils, resulting in a compulsory warm-up time interval of ∼2 FPY for TF-coils. The nuclear heating loads to other CFETR components were generated. As an outcome of this work, the applicability of McCad on CFETR neutronic modeling is demonstrated.

3D high-fidelity automated neutronics guided optimization of fusion blanket designs

Dynamic Optimization Of Tokamak Plasmas Via Control Parameterization And The Time-Scaling Transformation

Toward a First-Principles Integrated Simulation of Tokamak Edge Plasmas

Nuclear-thermal-coupled Optimization Code for the Fusion Breeding Blanket Conceptual Design

Evaluation of the impact of plasma operation scenarios on the fusion reactor blanket design using an integrated numerical plasma and neutronics analysis suite

Development of neutronic-thermal hydraulic-mechanic-coupled platform for WCCB blanket design for CFETR

Development and Application of a Neutronics/thermal-Hydraulics Coupling Optimization Code for the CFETR Helium Cooled Solid Breeder Blanket with Mixed Pebble Beds

Using One Hybrid 3D-1D-3d Approach for the Conceptual Design of Wccb Blanket for Cfetr

Conceptual Design and Comprehensive Optimization Analysis of a Fusion-Fission Hybrid Reactor Water-Cooled Pressure Tube Blanket

Development of a Neutronics/thermal-Hydraulic Coupling Optimization Code and Its Application on the CFETR HCSB Blanket

A novel discontinuous-Galerkin deterministic neutronics model for Fusion applications: development and benchmarking

Neutronics Analysis of Fusion Blanket Based on the Spherical Harmonic Function and Finite Element Method

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Conceptual design study for heat exhaust management in the ARC fusion pilot plant

Multifunctional Neutronics Calculation Methodology and Program for Nuclear Design and Radiation Safety Evaluation

Neutronic Analyses for CFETR with Modular Helium Cooled Lithium Ceramic Blanket

Integral Analysis of the Effect of Material Dimension and Composition on Tokamak Neutronics

Comparison analysis of 1D/2D/3D neutronics modeling for a fusion reactor

Conceptual design workflow for the STEP Prototype Powerplant

Neutronics Parameters Optimization of the Improved Dual-Cooled Waste Transmutation Blanket for FDS

Structure Optimization of Helium-Cooled Blanket for Fusion Reactor Based on Three-Dimensional Full-Scale Thermal-Hydraulic Analysis